Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

what is poblem ???? any body solve this

December 28th, 2015, 8:12

RT
UDed
PK_4 C: 42 H:0

ActiveFW : 00
FWVer : 0001
SATA PLL cal done
DDR size detected = 8MB

DDR size detected = 8MB

*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found
*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI FoundU
S_0:22
SO_1
SPU@26'C,5086mV
IS=3
CLA ..36/55
HO..OK
HO RPM=1823 OK
AC 1471
ST..OK
mS1 00000003
GT:417
SC(L):4104/-6
BE.N:15
LD..OK
SK C: 7223 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
Bump Limit Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 00
Ovly loaded to 0x00014D00
Ovly loaded to 0x1002E068
FdtTable Loaded. Rev:0x02
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
| 19 | RLIST | 3 | 0 | 0 | 1140 |
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
| 19 | RLIST | 3 | 1 | 0 | 1340 |
[GL][90PT:2256,3F7B]
Up MC

PwrOn RRO1x @ H0
Table) cos = 563456, sin = 576000
Coeff) cos = 22746, sin = -96265


DiskSlip : 114 [SrvTrk]
DiskSlip : 108 [SrvTrk]

PwrOn RRO1x @ H2
Table) cos = 601088, sin = 448000
Coeff) cos = -52570, sin = 54775


DiskSlip : 106 [SrvTrk]
DiskSlip : 103 [SrvTrk]
TgtCyl: 832
Hd: 0 Zn: 0 Avg.:- 312
TgtCyl: 266176
Hd: 0 Zn: 1 Avg.: 1027

SVCAL(0080,0000)-->PASS
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
| 167 | SMARTDRM | 31 | 0 | 0 | 1140 |
DAM
DAM
DAM
DAM
DAM
DAM
DAM
DAM
| 167 | SMARTDRM | 31 | 1 | 0 | 1140 |
DAM
ReadyTime = 24331547 us
EPOK



[DIPM_TMOUT:00000000]
ENG>mS1 00000003
UF 3 1stGrayErr Hd:0
SK C:171331 H:1
SC(U)..4104/68
UD..OK : 68
PK_4 C: 45 H:1

Re: what is poblem ???? any body solve this

December 28th, 2015, 8:42

Suspect head(s) and/or media issues.

Re: what is poblem ???? any body solve this

December 28th, 2015, 15:09

DAM = Data Address Mark ?

IIUC, both head 0 and 1 have problems. I don't believe it will make any difference, but have you eliminated oxidised HDA contacts on the PCB?

Re: what is poblem ???? any body solve this

December 28th, 2015, 16:05

pcimage wrote:Suspect head(s) and/or media issues.

+1

Re: what is poblem ???? any body solve this

December 29th, 2015, 6:06

DAM
DAM
DAM
DAM
| 167 | SMARTDRM | 31 | 1 | 0 | 1140 |
DAM
ReadyTime = 24331547 us
EPOK



[DIPM_TMOUT:00000000]
ENG>mS1 00000003
UF 3 1stGrayErr Hd:0
SK C:171331 H:1
SC(U)..4104/68
UD..OK : 68
PK_4 C: 45 H:1


This right here in bold means heads 100%
Post a reply