MRT PRO VS SAMSUNG HD502HJ

[DRUG]

Device identification fails, after selecting the correct family either via sata or terminal mode only all I get is this:

Family: F3
Model:
Technology mode key : .....................: Err

Extend disk identify:
Load extend disk identify : ...............: ERR

Module menu...
Load SA Module dir : ......................: ERR

any hints ?

[labtech]

Loader?

[datahdd116]

Device identification fails, after selecting the correct family either via sata or terminal mode only all I get is this:

Family: F3
Model:
Technology mode key : .....................: Err

Extend disk identify:
Load extend disk identify : ...............: ERR

Module menu...
Load SA Module dir : ......................: ERR

any hints ?

on/off

[michael chiklis]

MRT is very bad for working on Samsung drives.
If you can't afford tools as PC3000 or DFL then you might try with tools as Sediv for Samsung or SHT.

Give a look here:
http://www.hddoracle.com/viewtopic.php?f=84&t=1512
http://www.hddoracle.com/viewtopic.php?f=149&t=1522

[Amarbir[CDR-Labs]]

MRT is very bad for working on Samsung drives.
If you can't afford tools as PC3000 or DFL then you might try with tools as Sediv for Samsung or SHT.

Give a look here:
http://www.hddoracle.com/viewtopic.php?f=84&t=1512
http://www.hddoracle.com/viewtopic.php?f=149&t=1522

In Samsung PC 3000 Rocks ,MRT And DFT Is Not even Close