Seagate not coming to terminal

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
athena
  • athena
  • Posts: 152
  • Joined: May 30th, 2014, 0:54
  • Location: Universe

Seagate not coming to terminal

January 22nd, 2016, 8:18

There are several posts and information for this typical symptoms ,but still I would like to know more --


Seagate Barracuda FW KC45 , Disk stays busy & does not come to terminal.
After isolating HDA it gives following terminal -

Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000



I have tried to short read channel but not getting success.

Now I want to know whether this could be because of any other reason like --

1) PCB non native
2) PCB issue,

can someone pls. help
day1data
  • day1data
  • Posts: 186
  • Joined: January 6th, 2015, 2:21
  • Location: Germany
  • Website

Re: Seagate not coming to terminal

January 22nd, 2016, 8:27

What kind of sounds are coming from the drive.

Does it continue to spin or spin down?
athena
  • athena
  • Posts: 152
  • Joined: May 30th, 2014, 0:54
  • Location: Universe

Re: Seagate not coming to terminal

January 22nd, 2016, 8:33

hi day1data
Thanks.
it spins normally no abnormal sounds nor it spins down as well.
gps31
  • gps31
  • Posts: 346
  • Joined: January 18th, 2010, 23:53
  • Location: india

Re: Seagate not coming to terminal

January 22nd, 2016, 10:33

Check Serial Number from rom content (External Programmer) and compare S/N in lable ( I had faced this many times)
athena
  • athena
  • Posts: 152
  • Joined: May 30th, 2014, 0:54
  • Location: Universe

Re: Seagate not coming to terminal

January 24th, 2016, 10:10

Hi gps31
Thanks. I was about to do the same ,but before that customer took disk back due to long delay from my side. Tragic end to this case :(
vijayan
  • vijayan
  • Posts: 16
  • Joined: April 29th, 2016, 1:03
  • Location: india
  • Website

Re: Seagate not coming to terminal

May 23rd, 2016, 11:57

Dear Sir

HDD Sping Possible

Other Way noot Sping Not Possibles
vijayan
  • vijayan
  • Posts: 16
  • Joined: April 29th, 2016, 1:03
  • Location: india
  • Website

Re: Seagate not coming to terminal

May 26th, 2016, 9:42

FAIL Servo Op=0100 Resp=0003
this case

1 check pcb
2. hdd sping ? rom or pcb problem
3. most this error hdd head problem 10% only rom problem




any ? call 9841983643 raminfotechdatarecovery.com
hddsevice
  • hddsevice
  • Posts: 48
  • Joined: May 28th, 2016, 1:40
  • Location: Viet Nam

Re: Seagate not coming to terminal

May 28th, 2016, 1:51

athena wrote:There are several posts and information for this typical symptoms ,but still I would like to know more --


Seagate Barracuda FW KC45 , Disk stays busy & does not come to terminal.
After isolating HDA it gives following terminal -

Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2EA0 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000



I have tried to short read channel but not getting success.

Now I want to know whether this could be because of any other reason like --

1) PCB non native
2) PCB issue,

can someone pls. help

check your work with ROM and PCB
find 1 PCB code used to work and move ROM to
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index