ST3500325AS Problem

[gps31]

With PCB+HDA

Rst 0x08M


ASCII Diag mode

F3 T>

RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00 00 A0 E1

opts = 00000000


RW Err = 84150180

Just with PCB alone I m getting same

Rst 0x08M

ASCII Diag mode

F3 T>

RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00 00 A0 E1

opts = 00000000


RW Err = 84150180

Contacts are clear and well
After all getting LED CC or CE error

How to rectify this?

[gps31]

Sorry model number ST9500325AS 5400.6

[day1data]

Need more info.

Does the drive stay spinning, any usual noises?
Is the model and capacity detected?
Can you view any sectors?
Do you have access to terminal?

[hyuce]

+1 day1data share more information.

but i would say heads issue.

[gps31]

1. Hdd is not detected when spinning with tor tor sound(not Tick Tick) 11 times with small interval

2. After Spin-down the hdd is detected with correct ID no Size but not initialized (image Attached)

One More info: When Connecting just PCB with sata and power the system detect with correct ID

how this how to resolve this?

Sorry for poor explanation

Attachments

[pcimage]

Heads and/or media. Requires heads exchange plus further work.

Not DIY

[hpw333]

this is head problem

[galaxy]

head problem

[MindMergepk]

Requires heads exchange plus further work.

+1

[Amarbir[CDR-Labs]]

1. Hdd is not detected when spinning with tor tor sound(not Tick Tick) 11 times with small interval

2. After Spin-down the hdd is detected with correct ID no Size but not initialized (image Attached)

One More info: When Connecting just PCB with sata and power the system detect with correct ID

how this how to resolve this?

Sorry for poor explanation

Well,
PM Me If you Need a Head Swap In This Drive ,We Are Based in Chandigarh .