Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 13th, 2016, 12:50
Friends/Experts , please help me to get my Seagate ST31000524AS back. I tried Self Healing commands at F3 6> level. All batch file passed except B21. Please help.
June 13th, 2016, 13:46
What may have led to drive failure? Anything out of the norm?
What was the drive's behavior, physical and logical, if any, PRIOR to doing anything with it?
June 16th, 2016, 9:30
Thank you for your reply. When I start the computer my HDD drive starts to spin and it gives some
(may be 10 or so)clicking sound and goes salient. I am having RS232 terminal connector. I can access F3 T> terminal point.
i have tried ctrl+Z . It spins down. But ctrl+U gives error.
You can give me step by step instruction. I"ll try it and post the result .
June 16th, 2016, 10:16
Sometimes could be a firmware issue, but most frequently it is a heads issue.
Just post the terminal upon issuing the "U" command.
June 18th, 2016, 12:01
ASCII Diag mode
F3 T>/2
F3 2>Z
HighPowerMode
Spin Down Complete
Elapsed Time 0.086 msecs
F3 2>U
HighPowerMode
ExecuteSpinRequest
DiagError 00006008
Spin Error
Elapsed Time 13.748 secs
R/W Status 2 R/W Error 84150180
F3 2>
some time i get this error message.
June 18th, 2016, 15:26
Looks like mechanical problem
June 18th, 2016, 17:21
DiagError 00006008
this error mean : Spin Up Failed
this Refer To Mechanical problem there
you run B level this mean data is not important for you
if you need online help PM me i will check this case by TV
Powered by phpBB © phpBB Group.