ST9500325AS

[unknown]

Hello!
Terminal output:
Rst 0x08M
RW cmd 0002 req = 40 55 00 00 08 00 00 00 00 00 00 00 00 9A 05 00 FF 9E 05 00 00 9A 05 00
opts = 00001121

RW Err = C3160080

RW cmd 0002 req = 40 55 00 00 01 00 00 00 00 00 00 00 00 9A 05 00 FF 9E 05 00 00 9A 05 00
opts = 00001121

RW Err = C3160084

RW cmd 0002 req = 2C 76 02 00 08 00 00 00 00 00 00 00 00 9A 05 00 FF 9E 05 00 00 9A 05 00
opts = 00001121

RW Err = C3160080

RW cmd 0002 req = 2C 76 02 00 01 00 00 00 00 00 00 00 00 9A 05 00 FF 9E 05 00 00 9A 05 00
opts = 00001121

RW Err = C3160084

RW cmd 0002 req = 89 3E 00 00 17 02 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121

RW Err = C3160080

RW cmd 0002 req = 89 3E 00 00 01 00 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121

RW Err = 43110081

RW cmd 0002 req = 75 5F 02 00 17 02 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121

RW Err = C3160080

RW cmd 0002 req = 75 5F 02 00 01 00 00 00 00 00 00 00 08 8C 08 00 87 97 09 00 08 8C 08 00
opts = 00001121

RW Err = C3160084

ASCII Diag mode

F3 T>

Drive shows 0 capacity. Full model and SN.
Module 2A and 2B (Translator) are corrupted.
Heads are functional.
Reading by serial port via MRT utility with max. 128kb/s

Is there any solution to read via high speed.

thanks in advance.

[hpw333]

this problem can be fixed easy
but till me this hdd for Repair or Data Recovery ?

[unknown]

Data Recovery.