Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

50P flatcable needed with a COMAX E187825 FC-50P connector.

August 16th, 2016, 18:31

I need this flabcable. It is broken inside.

http://myalbum.com/albums/sJej9B4bqUOX

On the connector is written COMAX E187825 FC-50P.

Length is plm 10 centimeter.

The other end is a soldered connector to a board.

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 16th, 2016, 23:02

Is it this one ?
Or you can DIY, buy this cable, cut it (10CM) solder one side

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 5:19

Sorry, I made a mistake with the link, the ccorrect link is:

http://myalbum.com/albums/sJej9B4bqUOX

if a moderator edits it in the first post it's ok by me, this message can then be deleted.

Maybe it's a SCSI cable.

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 5:56

Moderator, sorry, I made the same mistake again.

This is finally the working link:

http://myalbum.com/album/sJej9B4bqUOX

Forget/delete the last post (not this one).

I think I need a female SCSI crimp connector, I see them in the USA, but $19,50 shipping costs is too steep. So I'm looking for a European/Asian female scsi crimp connector.

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 7:05

Its the same link

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 7:21

You are right Jermy. If you delete the "s" in "albums" you will have a working link. I send an improvement message but it had to be moderated.

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 8:34

OK, I already managed to see those pictures yesterday, and my first reply:
jermy wrote:Is it this one ?
Or you can DIY, buy this cable, cut it (10CM) solder one side

Stands, nothing has been changed

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 9:17

check this link
http://www.cablesonline.com/50pin2lainri.html

Re: 50P flatcable needed with a COMAX E187825 FC-50P connect

August 17th, 2016, 9:18

and this one
http://www.circuitsonline.net/forum/view/133301
Post a reply