Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Need help fix PCB samsung

September 14th, 2016, 14:48

I have hard drive samsung 500Gb company
Currently to fire hot, hard drive will not boot not spin
Need help repairing PCB for data recovery
You help me here's the picture I sent forward to help
Thanks
samsung-hot-pcb.jpg

samsung-hot-pcb (1).jpg

Re: Need help fix PCB samsung

September 14th, 2016, 16:19

get a PCB from a matching drive

Re: Need help fix PCB samsung

September 14th, 2016, 17:00

Where in the US are you located?

Re: Need help fix PCB samsung

September 14th, 2016, 18:03

tonny wrote:I have hard drive samsung 500Gb company
Currently to fire hot, hard drive will not boot not spin
Need help repairing PCB for data recovery
You help me here's the picture I sent forward to help
Thanks
samsung-hot-pcb.jpg

samsung-hot-pcb (1).jpg

This is STJ009 power mosfet.
If fire hot, replace.

Re: Need help fix PCB samsung

September 14th, 2016, 18:06

Many people have reported that after replacing the STJ009, the replacement IC burns up again.

Re: Need help fix PCB samsung

September 14th, 2016, 18:33

fzabkar wrote:Many people have reported that after replacing the STJ009, the replacement IC burns up again.

Why after replacing STJ009 burns up again you share more

Re: Need help fix PCB samsung

September 14th, 2016, 18:55

hddsevice wrote:
fzabkar wrote:Many people have reported that after replacing the STJ009, the replacement IC burns up again.

Why after replacing STJ009 burns up again you share more

I honestly don't know. The only possibilities that I could come up with were shorted turns in the coil, or a fault in the PWM drive from the motor controller.
Post a reply