Have someone work with this Hdd WDC WD10SPCX-08S8TT0

[H13]

Hi All ..

Have someone got this Hdd for recovery b4 ?!

i try to read 00c5 as my friend joy advice me to do first but i can >>
drive spinning ok sound normal ..

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 205 550
SA regions address...................... : by default
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 02.0TA
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.0TA
Servo F/W version....................... : AK.26

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : Ok
SA Access............................... : NONE

Configuration reading................... : No SA copy avalabled



if someone face and success with this Drive plz help


thanks

[F_ARG]

Hi! Does the hdd have original PCB? Have you already tried to upload a loader?

Best!

F

Hi All ..

Have someone got this Hdd for recovery b4 ?!

i try to read 00c5 as my friend joy advice me to do first but i can >>
drive spinning ok sound normal ..

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 205 550
SA regions address...................... : by default
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 02.0TA
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.0TA
Servo F/W version....................... : AK.26

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : Ok
SA Access............................... : NONE

Configuration reading................... : No SA copy avalabled



if someone face and success with this Drive plz help


thanks

[H13]

Hi! Does the hdd have original PCB? Have you already tried to upload a loader?

Best!

F

Hi All ..

Have someone got this Hdd for recovery b4 ?!

i try to read 00c5 as my friend joy advice me to do first but i can >>
drive spinning ok sound normal ..

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 4
Cyl Count............................... : 256

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok
Flash ROM dir reading (Ext)............. : Ok (Active)
Modules directory address............... : 205 550
SA regions address...................... : by default
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 02.0TA
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.0TA
Servo F/W version....................... : AK.26

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : Ok
SA Access............................... : NONE

Configuration reading................... : No SA copy avalabled



if someone face and success with this Drive plz help


thanks

hi and thanks

it's not taken the family automatic .. i thinks pc3k is not support it yet ?!


any one can help ?

[H13]

Hello Friends --

No body have this drive b4 ?