Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
September 24th, 2016, 8:14
Hello everyone,
I have a client that i installed a new Western Digital Black 750gb drive in his laptop about 4 months ago. System wouldn't boot, pulled the drive hooked it up to the sata to usb on my workstation. See something, so i fired up GETDATABACK, it see's the drive space but no assigned drive letter. Disk management asking to format the drive. Close that out and start to run GetDataBack.
Use that program alot in the past with good success.
It finds nothing on this, just error 10's bad block
The drive spins up no clicking.
Any thoughts on what i can do or try if anything?
Powered by phpBB © phpBB Group.