Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
September 25th, 2016, 13:29
Hello,
I have not working disk Samsung HM321HX. This is USB 2.0 disk. At the moment disk not working, only hear strange noise, disk not spining, diode blininkg. First I think, that head part on the plater, but after open disk in clear room, head parked normally.
On this link I record noise from disk:
https://www.youtube.com/watch?v=QYatGX5wmsA&feature=youtu.beCould you help, what could be a problem?
Thanks
- Attachments
-

September 25th, 2016, 15:43
It's look like hdd cap is bent into drive and it keep spindle from spin up.
September 25th, 2016, 22:56
lasek wrote:At the moment disk not working, only hear strange noise, disk not spining, diode blininkg. First I think, that head part on the plater, but after open disk in clear room, head parked normally.
Did you try turning the platter by hand?
September 26th, 2016, 2:13
Yes I tried. Platter spin without any problem. But In fact cover disk is a little bent.
September 26th, 2016, 16:08
After when I straighten cover disk start spining. So the problem was with cover which brake motor.
Powered by phpBB © phpBB Group.