Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST500DM002 Not Detect In Bios !!!!

October 23rd, 2016, 8:41

ST500DM002 Not Detect In Bios !!!!
My Hard Disk Not Detect In Bios & OS !

i,m clear smart and use m0,2,2,,,,,22 To Fix This But Not Working !

after turn on HDD See write this on Hyper Terminal :

Code:
Boot 0x40M
Spin Up
TCC-0022[0x000065B4][0x00006A20][0x00006E8C]
Trans.

Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-0022
(P) SATA Reset

MCMTFileHandler: EXCEPTION: Failed MCMT read request
MCMTFileHandler: EXCEPTION: Failed MCMT read request
MCMainPOR: EXCEPTION: SIM aborted prior to MCMT read
MCMainPOR: EXCEPTION: POR Failed General
MCMainPOR: Feature Disabled...
PowerState = IDLE1
PowerState = IDLE2
APM disabled by SPort
ASCII Diag mode

F3 T>
F3 T>/7

F3 7>X

HighPowerMode
TCC-0022Status 0001 Req 0002
Head 00 Resistance 0183
Head 01 Resistance 00F0

F3 7>

PCB heads resistance Working Fine !
How Can Fix This ?
I Search On Forum But Not Find Command To Fix This , i,m not hearing Clicking Noise After Plug in Sata and turn on hdd .
Sorry English Not My First Language .
Thanks , Regards .

Re: ST500DM002 Not Detect In Bios !!!!

October 23rd, 2016, 16:15

mo4sa wrote:i,m clear smart and use m0,2,2,,,,,22 To Fix This But Not Working !

F3 7>X

HighPowerMode
TCC-0022Status 0001 Req 0002
Head 00 Resistance 0183
Head 01 Resistance 00F0


what is your intent, if you just want to fix it for future use, forget it.
if you are after data from this drive, best is to send to a DR Company.

drive has atleast 1 weak head and required clean room work.

good luck.

Re: ST500DM002 Not Detect In Bios !!!!

October 24th, 2016, 1:28

ITS SHOW MCMT TRY WRITE THIS MODULE AND HARD DISK DETECT AGAIN IN BIOS
Attachments
MCMT MODULE ST500DM002.rar
(105.6 KiB) Downloaded 749 times

Re: ST500DM002 Not Detect In Bios !!!!

October 24th, 2016, 12:09

galaxy wrote:ITS SHOW MCMT TRY WRITE THIS MODULE AND HARD DISK DETECT AGAIN IN BIOS



Humm,
Volume 3 ,Head 0 sys File .How about trying to disable SMP Setting ? :)

Re: ST500DM002 Not Detect In Bios !!!!

October 25th, 2016, 5:42

Hello :cry: I,Can Fix This !!!!
Translator Regenerator But This Error !!!!!!!!

Rst 0x10M
RW: Disc Ctlr Initialization Completed.

No HOST FIS-ReadyStatusFlags 2002A1A5
ASCII Diag mode

F3 T>
ASCII Diag mode


How Can i Fix this and get my data !

Re: ST500DM002 Not Detect In Bios !!!!

October 25th, 2016, 9:52

FIRST BACKUP PLIST AND NG LIST AND TRY ON T LEVEL m0,6,2,,,,,22 - and m0,6,3,,,,,22

Re: ST500DM002 Not Detect In Bios !!!!

October 25th, 2016, 9:56

No HOST FIS-ReadyStatusFlags is a problem with some of FIDs, another words - System Files
First, try 'V40' to check for NRG defects...

Re: ST500DM002 Not Detect In Bios !!!!

October 25th, 2016, 16:56

with a weak head more you try to write more problem you will create.
Post a reply