Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
November 6th, 2016, 16:22
FW KC48
seagate 500gb
eeprom fail
How to change Sno in eeprom same FW KC48 got from another working HDD same Model
November 6th, 2016, 16:30
You cannot simply change s/n, the ROM contains other data absolutely 100% unique to the drive.
November 6th, 2016, 16:37
pcimage wrote:You cannot simply change s/n, the ROM contains other data absolutely 100% unique to the drive.
How Can I get data back?
November 6th, 2016, 16:53
Why do you think "eeprom" has failed?
Chip is broken?
November 7th, 2016, 3:03
pcimage wrote:Why do you think "eeprom" has failed?
Chip is broken?
Hdd needs to replace pcb eeprom supply voltage pin short
supply voltage to eeprom 0V
I removed eeprom voltage nearly 3 v
i replaced eeprom voltage ok
i swap the suspected eeprom to new board same model except serial no
same voltage loading
eeprom HAS FAILED
NEW eeprom with old board detecting new hard disk
November 10th, 2016, 16:53
Hello,
I suppose it is a Pharaoh drive ST500DM002 with PN 1BD142. In that case i can recover it without original rom.
Powered by phpBB © phpBB Group.