Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Help, There was an overload and something was damaged.

December 14th, 2016, 16:27

There was an overload and something was damaged but I do not know it's.
The piece is= AE 5LZQJ.
Image=http://imgur.com/a/G1lpV
Please if anyone knows that piece please tell me.
Thanks for reading.

Re: Help, There was an overload and something was damaged.

December 14th, 2016, 17:13

"AE" is a 5V TVS diode. It can be replaced with an SMAJ5.0A. Also check the adjacent zero-ohm resistors.

See http://www.users.on.net/~fzabkar/HDD/TVS_diode_FAQ.html

Re: Help, There was an overload and something was damaged.

December 14th, 2016, 18:21

fzabkar wrote:"AE" is a 5V TVS diode. It can be replaced with an SMAJ5.0A. Also check the adjacent zero-ohm resistors.

See http://www.users.on.net/~fzabkar/HDD/TVS_diode_FAQ.html

Thank you very very much, I really appreciate it a lot.

Re: Help, There was an overload and something was damaged.

December 23rd, 2016, 9:20

I don't have any Idea about it. But I should learn about it. Thanks
Post a reply