ST1000DM010 P/N : 2EP102-300

[C0GuM3I0]

ST1000DM010 P/N : 2EP102-300

Is dead and i change te PCb, same model but 2EP102-500


Terminal output is :

QNR Boot: Interface Reset Received.
Boot 0x40M
SpinUp
RECOV Servo Op=0100 Resp=0005[LBA=0x000044E8]N01010C20o0o0o0o0o0o0o0o0[LBA=0x000044E8]NO1111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01
RECOV Servo Op=0155 Resp=0005[LBA=0x0007DDB8]N01010C10o0o0o0o0o0o0o0o0[LBA=0x0007DDB8]NO1111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01
RECOV Servo Op=0055 Resp=0005[LBA=0x00006B6F]N01010C10o0o0o0o0o0o0o0o0[LBA=0x00006B6F]NO1111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01
RECOV Servo Op=0155 Resp=0005[LBA=0x0008043F]N01010C10o0o0o0o0o0o0o0o0[LBA=0x0008043F]NO1111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01111101010C10o0o0o0o0o0o0o0o01
SimError - Remaining in BootFW
Perform a double download without a power cycle


The PCB is not compatible ? Os it look like need change heads?


Thank you in advance.

[Tomset]

It is necessary to transfer native ROM to a new PCB

[Martin]

PN is ok. Did you read the ROM? First, check SN.