Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Rosewood

August 28th, 2017, 14:11

Hi to all! :mrgreen:


HDD ON
" No Clicking "

IS LOG

Boot 0x80M
Tech Unlock Handshake: 0x30A62C32
Reply:


ctrl+z
is log

QB
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

CTRL+Z
is log

RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
PrgF
(MC POR Duration): 00000007AC
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
ASCII Diag mode

F3 T>


ctrl+a
is log

Prod Desc: CheopsAM.1.0.SATA.Rosewood.Mule.Servo376.Rap30.AP1.4K + SMR Despo DFW
Package Version: RW07A8.SDM2.AA6973.SBM3
Serial #: W9318D7K
Changelist: 00997909
Model #: ST1000LM035-1RK172
ID: 101
Servo FW Rev: 8ACE
Heads: 2
PCBA SN: 0000K645KLPB
Default factory config: SD&D
Active config: SD&D

TotalHostWrites 00000000
NumberOfSegWrites 0000
TotalHPCBROs 00000000
TotalBWOs 00000000
MCMTWrites 00000000
Idle1Count 0000
MCSegmentUsed 0000
MCNodeUsed 00000000

is not id hdd, is not access sa.

help? :idea:

Re: Rosewood

August 28th, 2017, 16:02

please look!

Rd Sys File: vol = 3, FID = 181, Copy = 000...
Receiving file FILE_3_181_0, length = 40960

COM transfer baud rate set to 115200
Wr Sys File: vol = 3, FID = 181...
Unsupported by FW!
Wr Sys File: vol = 3, FID = 181...
Unsupported by FW!
Rd Sys File: vol = 3, FID = 093, Copy = 000...
Receiving file FILE_3_093_0, length = 8192
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)
Wr Sys File: vol = 3, FID = 093...
Unsupported by FW!
Rd Sys File: vol = 3, FID = 093, Copy = 000...
Receiving file FILE_3_093_0, length = 8192
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)
Rd Sys File: vol = 3, FID = 093, Copy = 001...
Receiving file FILE_3_093_1, length = 8192
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)
Wr Sys File: vol = 3, FID = 093...
Unsupported by FW!
Rd Sys File: vol = 3, FID = 093, Copy = 001...
Receiving file FILE_3_093_1, length = 8192
SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F)

Executing user command.................. : Show Alt-List
ASCII Diag mode

F3 T>/

F3 T>
Error switching COM port baud rate
Unlock Tech Mode, drive prepared by utility : Ok

Re: Rosewood

August 29th, 2017, 0:56

What seems to be the problem finally?

Re: Rosewood

August 29th, 2017, 7:18

Masterclass wrote:What seems to be the problem finally?



still do not know !! SA? :?:

Re: Rosewood

August 31st, 2017, 0:38

Translator

Re: Rosewood

August 31st, 2017, 0:58

darkforce1 wrote:Translator

How do you come to this conclusion?

Re: Rosewood

August 31st, 2017, 3:17

Unlock Tech Mode, drive prepared by utility : Ok


The drive has SA issue and can't initialize.


Did you try to Unlock tech mode?

if yes, try to refresh the drive ID.

HTH

Re: Rosewood

August 31st, 2017, 5:43

Rosewood...... Another wonderful product from the SEAGATE factory .......

With each new product, new "scrap"..... (and being generous)

Re: Rosewood

August 31st, 2017, 6:39

Sadly, most of us wouldn't have much work if it weren't for seagate.

Re: Rosewood

August 31st, 2017, 6:56

Very soon we will have an equivalent 1TB from WD too, my guess the quality should have much much better than Seagate.

Re: Rosewood

August 31st, 2017, 7:37

agent007 wrote:Very soon we will have an equivalent 1TB from WD too, my guess the quality should have much much better than Seagate.


Well,
The Firmware in Rosewood is a Little Bit Different According To Ace .Stuff Like SMP Etc Is Still Not Implemented .The SA Structure of the WD HDD is Very Different should be easy to recover then this POS

Re: Rosewood

August 31st, 2017, 7:50

lcoughey wrote:Sadly, most of us wouldn't have much work if it weren't for seagate.


Yes, more work, for sure!!!

But the work/cash ratio will be much lower (at least in my case)

And it is not a problem of the firmware lock, that only opens the doors to hell.......

Re: Rosewood

August 31st, 2017, 8:18

sosrecup wrote:
Unlock Tech Mode, drive prepared by utility : Ok


The drive has SA issue and can't initialize.


Did you try to Unlock tech mode?

if yes, try to refresh the drive ID.

HTH


Yes not ID!!

Re: Rosewood

August 31st, 2017, 8:19

Masterclass wrote:
darkforce1 wrote:Translator

How do you come to this conclusion?


Do not record anything on SA!

Re: Rosewood

August 31st, 2017, 8:23

these drives are lacking the command to write sysfiles, so don't expect too much from pc3k.

Re: Rosewood

August 31st, 2017, 8:38

pepe wrote:these drives are lacking the command to write sysfiles, so don't expect too much from pc3k.

:shock:

Re: Rosewood

August 31st, 2017, 9:00

pepe wrote:these drives are lacking the command to write sysfiles, so don't expect too much from pc3k.


there is a way to write sysfiles with pc3k to these drives. :idea:

Re: Rosewood

August 31st, 2017, 9:10

MindMergepk wrote:
pepe wrote:these drives are lacking the command to write sysfiles, so don't expect too much from pc3k.


there is a way to write sysfiles with pc3k to these drives. :idea:

:?: :?:

Re: Rosewood

August 31st, 2017, 9:50

MindMergepk wrote:
pepe wrote:these drives are lacking the command to write sysfiles, so don't expect too much from pc3k.


there is a way to write sysfiles with pc3k to these drives. :idea:


Hi,
Is that so i Need To Ask TS Support From Ace again Is This is The Case

Re: Rosewood

August 31st, 2017, 9:52

Wait TS Ace!!
Thanks!
Post a reply