How I can repair wd busy error

[Mosaad2018]

lf wd hdd take wrong firmware and become busy
and no response when I do power reset to save new firmware
How I can repair it

[pcimage]

lf wd hdd take wrong firmware and become busy
and no response when I do power reset to save new firmware
How I can repair it

Too vague,what did you actually do?

[Mosaad2018]

lf wd hdd take wrong firmware and become busy
and no response when I do power reset to save new firmware
How I can repair it

Too vague,what did you actually do?

hdd take wrong firmware and become busy

[Mosaad2018]

Do you need the data from the drive ?

What do you mean by taking wrong firmware ? Did you write wrong modules to platter or wrong ROM to PCB ?

Do you need the data from the drive ?No

What do you mean by taking wrong firmware ? Did you write wrong modules to platter or wrong ROM to PCB?Yeah

[pcimage]

lf wd hdd take wrong firmware and become busy
and no response when I do power reset to save new firmware
How I can repair it

Too vague,what did you actually do?

hdd take wrong firmware and become busy

Repeat the same vague and question and expect answer?

[scratchy]

Did you back up original firmware?

[Mosaad2018]

Did you back up original firmware?

Yeah

[ddrecovery]

Please answer these questions as accurately as you can.

1. Did you over write the original ROM?
2. If yes how did you write it?
3. Did you over write any of the System Area with new firmware?
4. If so how did you write it to the drive?
5. Do you have a copy of original ROM?
6. Do you have a copy of the original SA Firmware?
7. Why did you over write firmware in the first place.

[fzabkar]

Did you write wrong modules to platter or wrong ROM to PCB?Yeah

Yeah !

:roll: :roll: :roll:

Well, at least his Boolean logic is correct.

Code:

                              __
  wrong modules to platter  --\  \
                               |  |-- wrong firmware to somewhere
          wrong ROM to PCB  --/__/

[Mosaad2018]

Did you write wrong modules to platter or wrong ROM to PCB?Yeah

Yeah !

Well, at least his Boolean logic is correct.

Code:

                              __
  wrong modules to platter  --\  \
                               |  |-- wrong firmware to somewhere
          wrong ROM to PCB  --/__/

wrong ROM to PCB