Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 26th, 2018, 22:52
Hi everybody
My wd hdd take wrong firmware (Rom and Tracks)and become busy
and no response when I do power reset to save new firmware
How Can I Repair it
notice: I have Full Firmware Very close to him
Thanks
April 27th, 2018, 6:07
hamada wrote:notice: I have Full Firmware Very close to him
its not gonna help you
April 27th, 2018, 8:41
What is the complete model of the hdd ?
What where you trying to do ? With which tools, and what did you do that put the hdd in this state ?
Do you have backup of the original "rom and tracks" of your hdd made before whatever it is that you did to it ?
April 28th, 2018, 6:09
The complete model
MDL : WD1200BB-00DWA0 Caviar
DATE : 17 JAN 2004
S/N : WMAEH2214541
DCM : HSBACVJAH
Family: Trailblazer
I was try repair it with WDR program when its firmware damage from itself
I have backup but 80% from its original modules was bad
April 28th, 2018, 6:39
The Data very important to me
what can i do
I know some people have pc3000 and salvationdata
but they are not know how repair busy first
Thanks for all
help me
April 28th, 2018, 7:26
Do you have a list of the fw modules that you were able to save?
April 28th, 2018, 22:07
Yes I have
This is The list of the fw modules full as wdr backup
bad and good modules in this RAR File
This is the initial problem state of the drive as you see in The modules
The first state I found my hard drive on it
- Attachments
-
- My Modules.rar
- (241.63 KiB) Downloaded 486 times
April 29th, 2018, 9:31
As stated, there is a big chance WDr couldn´t backup correctly the modules, so that would be why they are stated as corrupud.
It would be important to know how was the drive behaving prior any manipulation.
If you need the data, now you have to send it to a data recovery professional.
Powered by phpBB © phpBB Group.