WD10JMVW 11AJGS3

[siamak5561]

Hi
I have this drive from wd may passport, it recognised by windows and MRT and even I can do logical test, but MRT dont recognised any information about family and etc, I try to write loader using module 1b 11 and 411 and succesfull to do that, but notting changed, any help guys?

[hddguy]

Maybe reading is difficult because of issues with pending process, or maybe is SED locked limiting access - without more information any responses will be relatively vague....

[unknown]

or maybe is SED locked limiting access

That's it.

@OP
You have to bypass SED to get access to FW.

[siamak5561]

or maybe is SED locked limiting access

That's it.

@OP
You have to bypass SED to get access to FW.

Im new hear ,what is SED, could you tell me how to bypass SED?

[siamak5561]

If you can do logic scan why are you messing with firmware ? Just clone/image the drive if you do need the data ?

If you do have access to LBA at a reasonable speed there shouldn't be any need to gain access to SA unless you want to patch 02, etc ...

I can logical scan , but drive have some bad sectors and during scan its stuck and reset ,in generally hard drive is not fully fanctional!

[siamak5561]

If you can do logic scan why are you messing with firmware ? Just clone/image the drive if you do need the data ?

If you do have access to LBA at a reasonable speed there shouldn't be any need to gain access to SA unless you want to patch 02, etc ...

I can logical scan , but drive have some bad sectors and during scan its stuck and reset ,in generally hard drive is not fully fanctional!

Clone / image it with MRT DE ?

Data is not important, i want to repair drive.

[siamak5561]

Don't bother. Buy new one.

Can u explain more? what is problem of drive? it not my drive but a client, so I want to repair.

[ddrecovery]

Don't bother. Buy new one.

Can u explain more? what is problem of drive? it not my drive but a client, so I want to repair.

The issue could be many things. But with a 1TB hard drive costing $50, its not worth risking fixing a drive that may (or more likely will) fail again. Besides surely you are charging more than the cost of a new drive to fix a bad one!!

[siamak5561]

Don't bother. Buy new one.

Can u explain more? what is problem of drive? it not my drive but a client, so I want to repair.

The issue could be many things. But with a 1TB hard drive costing $50, its not worth risking fixing a drive that may (or more likely will) fail again. Besides surely you are charging more than the cost of a new drive to fix a bad one!!

in your country yes but in mine, 50$ for us its like 500$ for you, so its worth to repiar drive for client.

[siamak5561]

You will not be able to fix it. Same way you can't revive dead people ! lol

Let it Rest in Peace. Buy a new drive.

can you explain what is problem? beacuse in first sight it seem not major problem.

[siamak5561]

or maybe is SED locked limiting access

That's it.

@OP
You have to bypass SED to get access to FW.

how to bypass SED ?

[siamak5561]

this is log from mrt
is there any hope ?
i cant logic scan anymore

Attachments