Samsung HD161HJ Detect Problem

[siamak5561]

Hi
Detect Problem
in treminal shows

Code:

 SPW 3.0G LinkOk!5V: 05030
SpnOk
spd:  0000 0000 0000
H: +00000
ADC: 0006
DAC: 7687
SK C: 0001AF85
ENG>SRV>
  SvoTbl Loaded
  CL 2306 CM 2377 SL 0E7B SM 0E76
  BD

  FdtTbl Loaded


Data Not important.

[manhcuongvn]

Data Not important.

Then buy a new drive.

extracly

[siamak5561]

Data Not important.

Then buy a new drive.

But I want to repair drive, look in your country maybe not worth to repair drives but in mine its really worth to repair drives.

[siamak5561]

What do you mean by "detect problem" doesn't ID at all ? Does ID but doesn't scan LBA ?

Do you have any sort of firmware tool to play with the drive firmware ? At least something like SeDiv or SHTR ?

Did you check PCB ? Did you check if there are other problems like junky PSU ?

Does the drive click or make strange noises ? When you power on the drive do you ear the heads moving to read MC ? DO NOT OPEN THE DRIVE ...

etc .. etc ....

More info would be required.

Not ID at all
I Have MRT Ultra
no strange noise

[siamak5561]

MRT is kind of "Junk" to work with Samsung .... If you don't have PC-3000 the best that you can try is SHTR ...

Register status show what ? BSY ? Error ?

Can you enter terminal commands like pressing ESC ?

Do you have identical model to hot swap ?

Can you test MC with MRT ? Can you access MC and backup modules and ROM with MRT or drive is stuck at BSY, etc ?

In terminal ONLY DBG mode, and no any other access