Seagate ST100DM003 Detect problem

[siamak5561]

Hi
Normally cant get F3 with this drive, so with Virtual start function in MRT I get F3 , but almost all terminal command not work like :

Code:

F3 T>i4,1,22

Overlay PartNum: 02191019
CFW PartNum: 04191054
Overlay CompileDate: 20130219
CFW CompileDate: 20130419

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay


F3 T>
ASCII Diag mode

F3 T>/T

F3 T>m0,6,3,,,,,22

Overlay PartNum: 02191019
CFW PartNum: 04191054
Overlay CompileDate: 20130219
CFW CompileDate: 20130419

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay

F3 T>
ASCII Diag mode

F3 T>/T

F3 T>F,,22

Overlay PartNum: 02191019
CFW PartNum: 04191054
Overlay CompileDate: 20130219
CFW CompileDate: 20130419

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay

F3 T>

Just /1N1 work, So any suggestion?

[siamak5561]

Hi
(...) So any suggestion?

Outsource to a REPUTABLE data recovery firm instead of gambling/playing with client's data ?

You shouldn't be using those "m" commands at random ... If you don't know what you are doing better not do it at all. You will kill the client data for good ...

You know, im tired being said in this forum, get my cases to another data recovery shop!!! just for info, im the only one on my city.
I know about M commands but data not important on this case, just want to repair drive.

[siamak5561]

this is when normally start drive

Code:

Boot 0x40M
Spin Up
RECOV Servo Op=0100 Resp=0005
Trans.

Spin Up
SpinOK
TCC:001C

(P) SATA Reset