WD 1TB WDBUZG0010BBK not init

[fabianf]

Hi there, I've some problems with a Western Elemtns 1TB 2,5" WDBUZG0010BBK.

Disk is shown in devmanager as WD Elemts...
Disk wont init by Diskmanagement -> E/A Error
After i plug the cable it starts to spin and make some noises (no clicking noises)
~20 seconds later the noise will end.

Victoria can see the disk, WDMarvel cant see the disk
DDRescue fail. Some Ideeas?

best regards
Fabian

Attachments

[pclab]

If no clicking noises, probably head stuck...
Do you ear the platter spin? Or a beeping noise?
What the PC is detecting is the USB controller...

[fabianf]

This is what u can hear...
Platter spins

i uploaded it to wetransfer... wav, m4a and mp3 is not allowed to post.
https://we.tl/t-n79qMKYGuf

when the noise ends, the platter still spin

best regards
Fabian

[pcimage]

Sounds like media damage to me, I expect there to be “dinks” on the platter surface(s).