ST1000LX015 - Seems Like NAND Issue

[Amarbir[CDR-Labs]]

Hello,
Connecting the Same To PC3K Gives The Following Terminal

ÿ
Boot 0x80M DensityList:0x0000
PrgF
LED:0x000000BD FAddr:0x000059D8

LED:0x000000BD FAddr:0x000059D8

LED:0x000000BD FAddr:0x000059D8

This is Even Before The Spindle Motor starts Up ,But The Motor Does Not Spin Too ,Is This a Board Issue Or NAND Has Gone Kaput ,Any Procedure For Achieving Data Recovery

[pepe]

Nand problem.
pepe

[Amarbir[CDR-Labs]]

Hello Everyone ,
I do have the ROM copy And Also Photos Of Drive And PCB ,Is There any Way This Can Be Solved ,I will Update The Same By Tommorow In This Post .

These Are Some threads I Could See

Acelab Forums - > https://forum.acelaboratory.com/viewtop ... 015#p37359
Acelab forums -> https://forum.acelaboratory.com/viewtop ... 015#p37243
Acelab forums - > https://forum.acelaboratory.com/viewtop ... 015#p36339

PS : Doomer And Masterclass Said They Can Do This ,Might Be We Can Get New PCB ,Transfer ROM And the Clear NAND Like Kahuna Series

[pepe]

i was also able to do these in the past, but these are significanlty more complicated than Kahuna, at least that's my experience.
pepe

[northwind]

Yep, Kahuna are a walk in the park compared to these...

[Amarbir[CDR-Labs]]

Dimitry And Pepe ,
I have heard There is a Upcoming Update With This Feature Added

[pepe]

We'll see in some time...
pepe

[digisupport]

+1 more complicated than Kahuna, but still possible.

[Amarbir[CDR-Labs]]

+1 more complicated than Kahuna, but still possible.

Well,
Can You Personally Do This ?

[digisupport]

+1 more complicated than Kahuna, but still possible.

Well,
Can You Personally Do This ?

Yes

[Amarbir[CDR-Labs]]

+1 more complicated than Kahuna, but still possible.

Well,
Can You Personally Do This ?

Yes

Well,
My Reply Would Be , Because If you can do it its gonna be a piece of cake then ,Let the indian lockdown finish on 31st ,I will get a donor drive and then experiment ,But i am sure around acelab conference ,Acelab will have a software update for the tools with this guys support ,But let me see what can be done .If only doomer ,pepe ,Dr kiev etc would have said they can do i would have left the thought

[digisupport]

+1 more complicated than Kahuna, but still possible.

Well,
Can You Personally Do This ?

Yes

Well,
My Reply Would Be , Because If you can do it its gonna be a piece of cake then ,Let the indian lockdown finish on 31st ,I will get a donor drive and then experiment ,But i am sure around acelab conference ,Acelab will have a software update for the tools with this guys support ,But let me see what can be done .If only doomer ,pepe ,Dr kiev etc would have said they can do i would have left the thought

I feel sorry for you AmArBir

[pcimage]

+1 more complicated than Kahuna, but still possible.

Well,
Can You Personally Do This ?

Yes

Well,
My Reply Would Be , Because If you can do it its gonna be a piece of cake then ,Let the indian lockdown finish on 31st ,I will get a donor drive and then experiment ,But i am sure around acelab conference ,Acelab will have a software update for the tools with this guys support ,But let me see what can be done .If only doomer ,pepe ,Dr kiev etc would have said they can do i would have left the thought

That’s very disrespectful to say that it must be a “piece of cake” because digitalsupport can do it (and so can I). Just because you can’t do it, it doesn’t mean we are all idiots and rely 100% on Acelab. I know for a fact that digitalsupport CAN do these drives.

[mr_spokk]

Well,
My Reply Would Be , Because If you can do it its gonna be a piece of cake then ,Let the indian lockdown finish on 31st ,I will get a donor drive and then experiment ,But i am sure around acelab conference ,Acelab will have a software update for the tools with this guys support ,But let me see what can be done .If only doomer ,pepe ,Dr kiev etc would have said they can do i would have left the thought

That’s very disrespectful to say that it must be a “piece of cake” because digitalsupport can do it (and so can I). Just because you can’t do it, it doesn’t mean we are all idiots and rely 100% on Acelab. I know for a fact that digitalsupport CAN do these drives.[/quote]

+1 very disrespectful

[Amarbir[CDR-Labs]]

Well,
Nothing is disrespectful ,He said he can do it and i said i will try cos he can do that so might be i can too .Once i get the donor and try might be i can share i could make it work or not .BTW PCImage really you think we rely 100% on Acelab .Its been 2 years i have updated acelab udma and i can still solve near to 100% cases , if you guys are not idiots then we also are not a bunch of idiots ,So reserve these kinda comments , those days are gone ,This is not disrespectful " I feel sorry for you AmArBir " ,How many times has he dome this on most of my posts ,Anyways i am not concerned ,I am on hddguru to take and provide help .As fas as this case is concerned its lined up for research when the lockdown ends ,Infact in my state its not even a lockdown its a full fledged curfew

[pcimage]

You seem to be wording your so-called answers based on what you think you said and heard, rather than what was actually said.

You said that it must be a piece of cake if digital support can do it, your words. Yet you twisted that around to “He said he can do it and i said i will try cos he can do that so might be i can too”. Not the disrespectful words you used!

You then go on to say “PCImage really you think we rely 100% on Acelab”.. Where did I say that?

What I actually said was “doesn’t mean we are all idiots and rely 100% on Acelab” which does not imply that I think you do, but you then go into a rant about your expertise in DR.

How can you order me to keep my comments not directed at you to myself?

[Amarbir[CDR-Labs]]

Friends Out There ,
I will work on this drive ,After 31st if there is relaxation of curfew/lockdown ,Its my first " NAND Failure " Family drive i feel After Kahuna ,but i am positive i can do that ,I will share the results with your people once thats done ,I do have a plan of action and steps i plan to take for this

[shahij]

Hello Guys,

Anyone figured out the case? I have a case with exactly identical LOG, but 2TB model - ST2000LX001.

[pepe]

yes, i got some results, but it required quite some patching of the fw.

pepe

[shahij]

It's a very good news pepe.

Friends Out There ,
I will work on this drive ,After 31st if there is relaxation of curfew/lockdown ,Its my first " NAND Failure " Family drive i feel After Kahuna ,but i am positive i can do that ,I will share the results with your people once thats done ,I do have a plan of action and steps i plan to take for this

What's your progress Amar?