Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 30th, 2020, 15:52
Was wondering if somebody came around this problem. Using the DDI 4 imager with the NVME pcie add on card but noticed whenever I image an Apple SSD ( Samsung, Sandisk etc... ) the imaging speed is always 3.9mb's. I tested it with a few other nvme SSD and I get the speed over 100mb/s. as it should be
I tested on several working Apple NVME SSD's with always the same results and a constant 3.9mb's read speed. The mainboard used for the DDI cards is the Gigabyte Deepspar is recommending.
Any input welcome.
Powered by phpBB © phpBB Group.