G-Raid Storage Raid0 - thunderbolt Configuration

[Tawfeek]

Case here is G-Raid storage . model : 0G02272 with Thunderbolt connection . the storage does n't recognize with mac os now . 2 HDD Hitachi every drive is 4Tb .the costumer said that storage space is 8TB . i try with r-studio and UFS as raid 0 from 1k to 1mb sector size , can see folder structure but almost files are corrupt. try GPOD , same result. try to make disk 1 as 0 , same result

my Question is : is this storage has unpopular configuration ?
any Hints here

[lcoughey]

Should be 4k raid 0 (stripe). I prefer UFS Explorer for these.

[DR-Kiev]

Should be 4k raid 0 (stripe). I prefer UFS Explorer for these.

+1 for this or 512Byte stripe size for older (none advanced formatted) drives

[Tawfeek]

Should be 4k raid 0 (stripe). I prefer UFS Explorer for these.

thanks in advance , i start scan with 4k and will feedback with result

[Tawfeek]

+1 for this or 512Byte stripe size for older (none advanced formatted) drives

thanks in advance , i firstly start scan with 4k and will see the result

[Tawfeek]

very weird , i try both 4k and 512 , got folder structure but all files are damaged