Loader for WD Palmer WD10SPZX-24Z10T0

[sosrecup]

Hello,

I need ressources for WD Palmer WD10SPZX-24Z10T0.

I tried fessources from hddguru sharinf files and hddsurgery database, unfortunately, it shows me

Permanent ovl (11) data uploading Device Error Detected: "VSC ERR OFF TOO LARGE"

The drive is locked. I used an unlock PCB to unlock it. it was recgnized and could read SA modules. Then by mistake I erased module 32. now drive run in kernel mode.

Thank yo in advance for your help.

Kind regrds

[sosrecup]

Anyone who have this ressource is willing to help

[fzabkar]

Can't you use the 22Z10T0 resources at hddsurgery.com?

https://firmware.hddsurgery.com/index.php?manufacturer=Western%20Digital&family=Palmer

[sosrecup]

Dear fzabkar,

Thank you for your help.

I tried all the ressources of hddsurgery database. they are not compatible (with PC3000 confirmation)

It says module 11 it too large.

[saltwater]

What microcode OVLY 11 do you need?

[digisupport]

And why not use the drives own mod 11 from when you read SA modules ?

[sosrecup]

And why not use the drives own mod 11 from when you read SA modules ?

because I stopped the backup of SA (because it was very slow) and empty the module 32.

[sosrecup]

What microcode OVLY 11 do you need?

Model: WD10SPZX-24Z10T0
FW: 01-01A01

Ideally, modules 01, 02, 11

Thank you for your help.

[saltwater]

What microcode OVLY 11 do you need?

Model: WD10SPZX-24Z10T0
FW: 01-01A01

Ideally, modules 01, 02, 11

Thank you for your help.

This is not enough. Please post fw microcode version.

[sosrecup]

Here the requested info:

Code:

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 1024 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 161 862
SA regions address...................... : by default
Module 02 access........................ : Granted
ROM Modules:
ROM version............................. : 02.1AP
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.1AP
Servo F/W version....................... : 01.3C

[Mikippp]

Hi,

Code:

>ROM Modules:
>ROM version............................. : 02.1AP
>ROM F/W version......................... : 0002000P
>Overlay F/W version..................... : 02.1BP
>Servo F/W version....................... : 01.3C


Mikippp

Attachments

11.zip

(718.9 KiB) Downloaded 623 times

[sosrecup]

Thank you for your help Mikippp

Now, it shows this:

Code:

Cache ovl(10) data uploading............ : Ok
Permanent ovl (11) data uploading Device Error Detected: "HOST DEBUGSTOP OCCURRED"