Maxotr STM3160215AS No detect

[siamak5561]

Hey guys
I have this OLD drive and and to access to Users data
No strange noise, and this is terminal, any advise ?

Code:

Reset
1024k x 16 DRAM
NHAWK - 1_Disk    S-42   03-27-07_13:01
HM SFI
!
(P)SATA Reset
Failed sys sect. write! Nwt Er 7c RdWr 1349c.00.0002

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 1349e.00.022b


This is old Seagate F drive not F3.
And I have access F level.

[pclab]

Almost sure it's a head problem.

[siamak5561]

Almost sure it's a head problem.

Why head?



is there any command Like m0,2,2,,,,,22 for this old drives ?

[pepe]

that 'm' command is not magic, despite many consider it so. And there's no magic for these either.
Pc3k has a patch for this problem that works on most pre-F3 firmwares but not all.
On the other hand, it can be a sign of weak/contaminated heads as well, as PcLab said.

pepe

[siamak5561]

that 'm' command is not magic, despite many consider it so. And there's no magic for these either.
Pc3k has a patch for this problem that works on most pre-F3 firmwares but not all.
On the other hand, it can be a sign of weak/contaminated heads as well, as PcLab said.

pepe

So I have MRT Ultra, Can I use this patch ?

[pepe]

I haven't ever used MRT, so i cannot tell if it has such option or how to access it.
Try asking their support or forum.
pepe

[siamak5561]

I haven't ever used MRT, so i cannot tell if it has such option or how to access it.
Try asking their support or forum.
pepe

What the name of patch in PC3K? or what is do , so I can simulate that in MRT.

[pepe]

it can be initiated from within Data Extractor using a loader, among a couple of other patches.

[siamak5561]

I Get its Loader and have this option in MRT, what would you suggest I use?

[pepe]

it won't help just uploading a loader. This dialog does not present anything in addition to ldr loading.

[ccc]

I haven't ever used MRT, so i cannot tell if it has such option or how to access it.
Try asking their support or forum.
pepe

What the name of patch in PC3K? or what is do , so I can simulate that in MRT.

HI
I have access to both tools , PC3k and MRT, and I can tell you that only PC3k have that option in the Seagate U5 utility....No way you can simulate those steps in MRT.....The U5 utility in MRT is too simple and without any DR options to be used.

Rgds