Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 12th, 2021, 1:52
Hello everyone
I have been recovering data from iPhones, macBooks and mobile phones that the motherboard is damaged and not working anymore and requires microsoldering chip reballing and replacing...etc recently i have been looking into doing hard disk data recovery too, and i have been searching and looking but i have no idea what are the necessary equipment ( software and hardware) that i need to start. i have laminar flow bench that i used to use for phone screen refurbishment to keep all the dust and particles out. i have been reading about PC-3000 there is a portable one and there is a normal one and i would appreciate if someone tells me which one is better as i don't do any data recovery out of our lab.
also if anyone can drop a link for head combs for head swap for almost all models that would be appreciated.
any help and information would be highly appreciated as that would save me so much time searching.
Thanks
February 12th, 2021, 18:42
I don't do HDD recoveries so can't help you there, but perhaps this is nice to watch:
https://youtu.be/UKQZ7Lse-N8
February 13th, 2021, 2:38
Thank you, i have watched the video and it’s really useful and informative. Thanks for sharing
February 16th, 2021, 13:41
Make sure you put in place a closed in clean place if cannot make a clean room -- when you are ready to purchase and install the recovery hardware and software.
February 24th, 2022, 17:57
February 26th, 2022, 9:55
Difficult to answer, because we don't know if dust settles from the top on the device.
Typically the device is covered by chamber walls, thus preventing any outter dust settling.
For phones it is probably ok, as normal dust isn't that big of a deal.
For hard drive disks, it is an issue.
March 1st, 2022, 9:02
Answer is NO ,
They are primarily for mobile phone technicians who like a little cleaner environment ,Like for pasting screen guard etc ,Avoid this please
Powered by phpBB © phpBB Group.