Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 13th, 2005, 0:29
Hy does anyone have , Firmware Modules M540kMOD
for MAXTOR D540X-4K
Thanks
March 13th, 2005, 10:44
which his/her email where you this
March 14th, 2005, 14:47
Hello !
I am looking for the firmware for the same drive aka 4K020H2 - 40gig.
my email:
pki@wp.pl
All tries of read data are answered by error and abort, the drive reports about 20gig (40151830 LBA), but should be twice as much !!
Do i need a PC-3000 to burn the firmware, or is it possible with a simply PC ?
Greetings from Poland !
March 15th, 2005, 2:57
PKi wrote:Hello !
I am looking for the firmware for the same drive aka 4K020H2 - 40gig.
my email:
pki@wp.plAll tries of read data are answered by error and abort, the drive reports about 20gig (40151830 LBA), but should be twice as much !!
Do i need a PC-3000 to burn the firmware, or is it possible with a simply PC ?
Greetings from Poland !
Hi,
You probably have a failing head 1.
There is nothing left but to change the heads. But this is very tough with 40G D540X. Not the changing itself that is tough , but to find an apropriate head. I never succeded with 2 headed D540X. I changed the heads, but the drive would not initialize. With 1 headed (20G) models it run pretty smoothly several times. The problem must be somewhere with alignment.
regards,
pepe
March 22nd, 2005, 11:12
hi alberto , i have many of them i can send to you
Powered by phpBB © phpBB Group.