WD20EARX-008FB0 can't access to user data

[magnetepazzo]

Hi guys i have this drive i have swap head and i can read all modelu of SA, the integrity check of SA say ok but i can't access to data area, not read any sector. I have thinked are SED issue and I have disabled but nothing have change, I have regenerated translator (after module backup) renegerator go successfull but nothing, head test say all head ok. Suggestions ? I can read sector only if i disable module 02

Attachments

[unknown]

All heads shows sector read error ?

[magnetepazzo]

All heads shows sector read error ?

Yes, i can read only with serial port

[pepe]

are you using donor pcb by any chance?

pepe

[magnetepazzo]

are you using donor pcb by any chance?

pepe

no is the patient PCB

[StuKeR]

Try replacing module 02 by another one. (Block access in RAM and load from other device)

[pepe]

Those status register values are bugging me... i would try a donor pcb too.

[vx1]

Note that the power button is off for the last 2 images.

1a.jpg (9.42 KiB) Viewed 7934 times

[magnetepazzo]

Note that the power button is off for the last 2 images.

1a.jpg

so? LOL it's a screenshot man, I turned off my drive and after I asked in the forum, would anything have changed if it was turned on? The steps made remain even if the hdd is turned off

[vx1]

Sorry, it was an observation for that:

Those status register values are bugging me... i would try a donor pcb too.

[magnetepazzo]

Sorry, it was an observation for that:

Those status register values are bugging me... i would try a donor pcb too.

no, easy it was not to attack you, it was just irony however the last one in red was present during some reading attempts.

[pepe]

facepalm, yeah, i missed the power state. Status and error regs are off in pc3k when power is off, so they don't show sht without power, that's what disturbed me...

What error do you get (abrt, unc, idnf)?
not security locked?

pepe