chip can not be fount in programmer

[mov45]

Hi I have a programmer TL-866II plus and HDD seagate 4tb where i wanna change one thing,

The seagate has a chip Winbond w25q16dws07 - autodetection sead unknown device, there are simmilar chip to choise (for example W25Q16DW1.8V@SOIC8) and I can read rom from this chip, but when I open this rom in f3rom explorer i have 2 bad's (like in the picture). Now the question: my I proced on that rom or something when rom was upload was wrong?

ps. do not know why the xgpro software doesn't have exaclly the same chip...

Attachments

ala.png (12.8 KiB) Viewed 3844 times

[digisupport]

There is nothing wrong with your ROM or ROM reading.
Hint, try to open a ROM from same model drive in F3 ROM Explorer free.

What´s wrong with the drive ?

[fzabkar]

SPI is a standard. As I see it, if a programmer supports one 1.8V chip and a particular pinout, then it should support all other SPI chips which have the same voltage and pinout.