WD40NPZZ no file structure

[jerovsek]

Hello,

I receive WD40NPZZ drive
it spin ok and become ready
FW backup is OK with three error's
Any suggestion to fix problem

Thank you

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 10
Cyl Count............................... : 384

Zone allocation table................... : Ok
SA SPT.................................. : 2140

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 512 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 238 986
SA regions address...................... : by default
SA regions address (RAM)................ : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok
SA defects assigned..................... : 1

ROM Modules:
ROM version............................. : 01.4VP
ROM F/W version......................... : 0001004V
Overlay F/W version..................... : 01.4WP
Servo F/W version....................... : 02.7A

Heads configuration..................... : by map
Heads number............................ : 10
Heads number in use..................... : 10
Switched off heads...................... : No
Heads map............................... : 0,1,2,3,4,5,6,7,8,9

Service area:
Power up log reading.................... : Ok
Dir data................................ : Yes
Permanent overlay....................... : Yes
CFG data................................ : No
SA dir reading (ID)..................... : Ok
SA Access............................... : Copy 0,Copy 1

Configuration reading................... : Ok
CFG tech mode lock...................... : No
Self encryption drive................... : No
Master Password......................... : has not been set
User Password........................... : has not been set
UA writing.............................. : Granted

HDD resources backup
HDD info report......................... : Ok
Read ROM
Into file............................... : <HDD Profile>\Data\SABackup\ROM\ROM_01-4VP_01-4WP_02-7A.bin
ROM Data size........................... : 512 Kb
Ok

Read ROM modules
Into file............................... : <HDD Profile>\Data\SABackup\ROM
Module : 0A............................. : Ok
Module : 0B............................. : Ok
Module : 20B............................ : Ok
Module : 30............................. : Ok
Module : 47............................. : Ok
Module : 0D............................. : Ok
Module : 4F............................. : Ok
Module : 181............................ : Ok

Reading modules
Into folder............................. : <HDD Profile>\Data\SABackup\Modules\


Module 2FF0............................. : Header error
Module 189.............................. : Header error
Module 190.............................. : Header error

Module checking 2FF0
Module 2FF0............................. : Header error

Module checking 190 (Second level translator)
Module 190.............................. : Header error

Module checking 189 (Second level translator index)
Module 189.............................. : Header error

[digisupport]

SpyGlass / SpyGlass2 drive, userdata is most likely encrypted.
Read by original MCU or decrypted afterwards.

[jerovsek]

Hello digisupport,

it is sata drive from Intenso USB enclosure.

[data-medics]

The latest PC-3000 has a menu just for salvaging/rebuilding the level 2 translator. Try to get as much of those modules as you can using ignore error reading.

Or is it just the header error and no actual bad sectors in those modules?

[digisupport]

Hello digisupport,

it is sata drive from Intenso USB enclosure.

Have not seen any 4 TB Intenso drives here yet. Will order one.
The sectors you are reading, do they contain any data or just zeros ?

[jerovsek]

Thank you data-medics and digisupport

I will check today.

For Intenso HDDs - in external drives or in retail boxes you can find different brands(Seagate, WD, Toshiba). No garantie, that if you buy 4TB external drive, you will find inside WD or some other brand.

[digisupport]

Thank you data-medics and digisupport

I will check today.

For Intenso HDDs - in external drives or in retail boxes you can find different brands(Seagate, WD, Toshiba). No garantie, that if you buy 4TB external drive, you will find inside WD or some other brand.

I know, it´s like all other Intenso, shopping around.
Seen "Recertified 2 TB Rosewoods" sold as 1 TB intenso

[jerovsek]

I check
LBA 8 EFI
LBA 2048 NTFS
data are from LBA 960645880

head test for all heads is OK