WD2000JD

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
fuzzy
  • fuzzy
  • Posts: 20
  • Joined: March 22nd, 2005, 0:00
  • Location: india
  • Website

WD2000JD

March 22nd, 2005, 20:36

i got wd2000Jd drive, and trying to copy to other media. it is very very slow....... copy few thousands sector ok but then just slows to crawl, any help ?

FUZZY
Tony
  • Tony
  • Posts: 112
  • Joined: October 8th, 2004, 15:49
  • Website

March 22nd, 2005, 20:38

SMART attributes corruption.
fuzzy
  • fuzzy
  • Posts: 20
  • Joined: March 22nd, 2005, 0:00
  • Location: india
  • Website

March 23rd, 2005, 1:24

how to fix that
Tony
  • Tony
  • Posts: 112
  • Joined: October 8th, 2004, 15:49
  • Website

March 23rd, 2005, 10:45

I know that can be fixed with PC-3000. I don't know if other utilities can fix this problem.
Archive_vi
  • Archive_vi
  • Posts: 56
  • Joined: April 19th, 2004, 6:38
  • Location: Russia, St. Petersburg

March 23rd, 2005, 11:47

Tony wrote:I know that can be fixed with PC-3000. I don't know if other utilities can fix this problem.


Did you try it? JD - SATA model, if we try use SiI3112A to access drive firmware it's impossible - something cut vendor specific command.

So we can get trouble here...
pepe
  • pepe
  • Posts: 4753
  • Joined: October 3rd, 2005, 0:40
  • Location: Hungary
  • Website

March 23rd, 2005, 17:00

Hi,

I 've got a bridge board to attach SATA drive to PC3k. It works with WD, but extremely slow, and doesn't work with maxtor. I'm examining the problem and in case I find something I let U know.

pepe
fuzzy
  • fuzzy
  • Posts: 20
  • Joined: March 22nd, 2005, 0:00
  • Location: india
  • Website

March 23rd, 2005, 23:57

I did check with pc-3000 , smart is ok sa is perfect. i am cloning within pc-3000 .data extractor.. but slow like crazy. like realy realy realy realy slowwww..... any suggestion to speed up will help alot.... using sata to ide adapter....
Tony
  • Tony
  • Posts: 112
  • Joined: October 8th, 2004, 15:49
  • Website

March 24th, 2005, 0:39

Sometimes you just have to live with it, man. :wink:
Archive_vi
  • Archive_vi
  • Posts: 56
  • Joined: April 19th, 2004, 6:38
  • Location: Russia, St. Petersburg

March 24th, 2005, 5:37

pepe wrote:I 've got a bridge board to attach SATA drive to PC3k. It works with WD, but extremely slow, and doesn't work with maxtor. I'm examining the problem and in case I find something I let U know.

pepe


Very funny, what acelab itself say what they have trouble with SATA WD, but SATA Maxtor work perfectly ;)

Not all bridge can help ;)
pepe
  • pepe
  • Posts: 4753
  • Joined: October 3rd, 2005, 0:40
  • Location: Hungary
  • Website

March 24th, 2005, 6:21

vi wrote:
pepe wrote:I 've got a bridge board to attach SATA drive to PC3k. It works with WD, but extremely slow, and doesn't work with maxtor. I'm examining the problem and in case I find something I let U know.

pepe


Very funny, what acelab itself say what they have trouble with SATA WD, but SATA Maxtor work perfectly ;)

Not all bridge can help ;)


Hi,

They recommended Granitedigital's bridge, I ordered, I got it, but doesn't work perfectly. I am trying factory mode commands in a debugger and there are strange things happening...
WD works just slow, really very ... slow.

By the way I need modules for WD 2500JD too.
maybe 2500JB would help as well.

pepe

April 2nd, 2005, 4:19

Pepe,

I have a working WD2500JB - 00FUAO

Could it help ? ?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index