ST4000LM024

[unknown]

Hello
Drive in topic came clicking and needs heads replacement.
After heads changed I was able to image approximately first 200GB.
The drive now come ready but no UA access and the ata registers failed when trying to enter the seagate utility.
Terminal shows :
SIM_Readydiskfile failure1:
ErrorCode: 0x00001002
SIM_Readydiskfile read again
SIM_Readydiskfile failure2:
ErrorCode: 0x00001002
DSC PASS
(P) SATA Reset

Any suggestions would be appreciated

[Tomset]

0x1002: Memory Miscompare Error

[unknown]

Thanks for your input.
Is it related to MC?

[WebClaw]

heads cannot read sysfile so either bad heads or surface defects.

[Amarbir[CDR-Labs]]

0x1002: Memory Miscompare Error

Hi,
Can you share or PM the Error List you have access too .

[Amarbir[CDR-Labs]]

Hello
Drive in topic came clicking and needs heads replacement.
After heads changed I was able to image approximately first 200GB.
The drive now come ready but no UA access and the ata registers failed when trying to enter the seagate utility.
Terminal shows :
SIM_Readydiskfile failure1:
ErrorCode: 0x00001002
SIM_Readydiskfile read again
SIM_Readydiskfile failure2:
ErrorCode: 0x00001002
DSC PASS
(P) SATA Reset

Any suggestions would be appreciated

Well,
It was cloning @ 200GB right why did you stop the process ,You should have let it run by changing cloning parameters in such a way that drive would skip errors

[unknown]

Case solved ( HM edited to start from H1 )
Thanks all for your inputs.

[mikebeary]

Case solved ( HM edited to start from H1 )
Thanks all for your inputs.

Can someone explain how to do this procedure? I have the same issue.