How to clear Current Pending Sector Count

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
M041633n
  • M041633n
  • Posts: 156
  • Joined: January 16th, 2024, 6:53
  • Location: Chennai

How to clear Current Pending Sector Count

July 7th, 2024, 10:27

Hello everyone!
How do I clear
Current Pending Sector Count and Uncorrectable Sector Count for this Model ST3500418AS 500.1 GB

Image
upload
M041633n
  • M041633n
  • Posts: 156
  • Joined: January 16th, 2024, 6:53
  • Location: Chennai

Re: How to clear Current Pending Sector Count

July 7th, 2024, 10:30

Reallocated Sectors Count too! Obviously it appears :roll: now
LostDataSa
  • LostDataSa
  • Posts: 202
  • Joined: December 23rd, 2013, 9:56
  • Location: Saudi Arabia
  • Website

Re: How to clear Current Pending Sector Count

July 24th, 2024, 12:54

neet tools to clear SMART
kotel
  • kotel
  • Posts: 167
  • Joined: April 2nd, 2024, 3:40
  • Location: on lifes edge

Re: How to clear Current Pending Sector Count

July 24th, 2024, 13:37

You can do it by terminal. Measure TX/RX pins on the drive, get an TTL adaptor that supports that voltage, get PuTTY or any other terminal, type in command to clear smart and you should be good to go.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index