ST1000VM002-1CT162-500

[M041633n]

How do I solve this error?

[fzabkar]

You can use PrtScn to capture the screen to your clipboard and then use Ctrl-V paste the clipboard contents into an image editor. Alternatively, use the Windows Snipping Tool to do the same.

[M041633n]

Thanks but I don't have an internet connection. I'm doing this from my phone.

[fzabkar]

ISTM that there is a problem with file #28.

[M041633n]

How do I fix that

And how do I get rid of this error

[M041633n]

Same identical hdd (S) SATA Reset's Often in terminal. I cannot initialize the disk. If I initialize the disk in disk management the disk vibrates with grk grk effect but the disk spins fine and I get CRC error on disk management. Any help would be highly appreciated I even erased it with Seagate F3t.

[M041633n]

Anybody??

[Zero Alpha]

Anybody??

Does it have full firmware access? Some of those commands should be safe to run:

Disk Info
Head Check
Show Glist
Show Plist
Show Smart

Do they work? I wouldn't mess with the more advanced commands as you could damage it.

[M041633n]

I don't know how to access the firmware
But the commands are working!

[M041633n]

What are these anyway??

[SWM]

https://www.google.com/search?q=0xC4030088

[Zero Alpha]

What tool are you using?

Does the Drive have full correct ID?

Is this drive making clicking sounds?

[M041633n]

1.F3 tool from hpwlab

2. What does a correct id mean or what's a id mean?
You mean the name of the hd in device manager??

3. No but at spin up! Other than this the drive does not show on my computers but formats OK with m commands but some m commands shows led error codes

[Zero Alpha]

Full id would be correct model, serial, firmware and capacity (1000gb) when its detected. It spins up clicks and spins down after its powered on?

[M041633n]

Yup correct! It shows those info!
Nope! Its perfectly running without spinning down except it will not show up on the computer or disk management or the device manager. Before that I used to press Self Test Button on the Seagate F3 Tools by hpwlab it'll show up on this pc but it's not showing me now. Any special m commands would throw Led FAddr error codes and spins. I have to replug the SATA Power Connector to get to the F3
Terminal again.

[SWM]

Russian-language forum. There are topics specifically about HDD repair.
SG http://forum.ru-board.com/topic.cgi?for ... pic=5614#1
https://forum-ru--board-com.translate.g ... pto=wapp#1
WD http://forum.ru-board.com/topic.cgi?for ... pic=5642#1