help please ST10000DM004 BarraCuda Pro

[gald]

hello i have hard ST10000DM004
BarraCuda Pro
Helium hdd
the problem the motor stuck and can't rotate and head stuck in plate
i replace the plate to new hdd and replace head swap
and i read rom from patient and donor but DFL ST see no making head adaptive rom
so any one can help me edit adaptive head manual in rom
or upload the 2 rom any can making me
head adaptive rom
the hdd
Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0007
and i changing 2 swap head same
please

Attachments

donor-rom2.rar

(456.21 KiB) Downloaded 173 times

rom 2 patient.rar

(459.65 KiB) Downloaded 176 times

[labtech]

This type of information has costed tens of thousands of dollars in R&D. Nobody will share such information, if known to begin with.
What DFL tell you? They don't know how to do it?

[gald]

This type of information has costed tens of thousands of dollars in R&D. Nobody will share such information, if known to begin with.
What DFL tell you? They don't know how to do it?

DFL TEAM said no support it at this time the software making adaptive rom but i see compere hex only 4bit changed
if any have another like pc3000 or another can try to making adaptive rom for me to test it
thanks

[gald]

hi all no one have pc3000 or mrt try to making to me adaptive rom ?
@fzabkar

[gold6565]

These disks have 2 ROMs, the adaptive ones are in the second one, read with the programmer.

[fzabkar]

These disks have 2 ROMs, the adaptive ones are in the second one, read with the programmer.

I can see the adaptives in both dumps. :-?

[gold6565]

These disks have 2 ROMs, the adaptive ones are in the second one, read with the programmer.

I can see the adaptives in both dumps.

This does not change anything, the ROM on the board is 2, you can see the total volume.

[fzabkar]

These disks have 2 ROMs, the adaptive ones are in the second one, read with the programmer.

I can see the adaptives in both dumps. :-?

This does not change anything, the ROM on the board is 2, you can see the total volume.

I don't understand. If gald's ROM image is a combined dump of both ROMs, then why are you asking gald to read the ROMs again with a programmer?

[gald]

These disks have 2 ROMs, the adaptive ones are in the second one, read with the programmer.

I can see the adaptives in both dumps.

This does not change anything, the ROM on the board is 2, you can see the total volume.

I don't understand. If gald's ROM image is a combined dump of both ROMs, then why are you asking gald to read the ROMs again with a programmer?

hello all
i read rom 2 from donor and pit the rom in rom 2 same in hex and i read another donor rom 2 all same
so the adaptive rom in rom 1
and see rar have 2 rom d and p
thanks

Attachments

rom.rar

(1.28 MiB) Downloaded 155 times