Seagate st1000dm003 how to enable smart

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
kotel
  • kotel
  • Posts: 167
  • Joined: April 2nd, 2024, 3:40
  • Location: on lifes edge

Seagate st1000dm003 how to enable smart

January 3rd, 2025, 10:09

How the heck do I enable smart monitoring on the st1000dm003? It now has it disabled (no smart data) and that causes it to crap out smart errors on boot. Firmware is cc43
Attachments
1000004464.jpg
SWM
  • SWM
  • Posts: 327
  • Joined: February 22nd, 2023, 13:49
  • Location: Eastern Europe

Re: Seagate st1000dm003 how to enable smart

January 3rd, 2025, 10:21

Can it be turned off?..
Maybe we should remove USB - SATA?
kotel
  • kotel
  • Posts: 167
  • Joined: April 2nd, 2024, 3:40
  • Location: on lifes edge

Re: Seagate st1000dm003 how to enable smart

January 3rd, 2025, 10:23

I tried it by sata but that just made w7 unbearably slooow. Plus it makes the hdd detection take >10min and complains about smart c5 issue. Besides cdi didn't launch and hdtune just froze
Arch Stanton

Re: Seagate st1000dm003 how to enable smart

January 3rd, 2025, 11:21

Did it occur to you that is is actually turned on and the drive has a firmware problem and that it is time to bin it rather than bore us to death with it?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index