HM321HI PCB replaced - Not discovered

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
lenisko
  • lenisko
  • Posts: 5
  • Joined: February 10th, 2025, 15:51
  • Location: Poland

HM321HI PCB replaced - Not discovered

February 10th, 2025, 16:20

Hey there!

I'm new so please bear with me ,)

My patient wasn't used for ~10 years and is not detected by OS at all.

Drive details:
HM321HI 320G, Rev A
F/W: 2AJ10002
PCB: BF41-00315A 05
SN: S2HZJ9FB211500
SEC SN: CNBA5902759B00CB12N1325

I managed to get the same drive (working, bad sectors) and made ROM backups for both (confirming dump was successful).

At first, I tried moving a patient ROM content to donor and put donor PCB to a patient drive - no luck, device still wasn't detected.
After that, I flashed a donor ROM to a patient, and put patient PCB to donor and booted a donor drive just fine - I guess that prove that issue is either patient ROM or mechanics itself?

Since I have no idea how to confirm if patient ROM is fine or corrupted nor if that's doable to recover it without any advanced hardware, I've attached ROM dumps in post.

Also leaving dmesg content:
Code:
[  265.342182] ata9.00: qc timeout after 5000 msecs (cmd 0xec)
[  265.342215] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[  265.342221] ata9.00: revalidation failed (errno=-5)
[  265.494151] ata6: link is slow to respond, please be patient (ready=0)
[  267.526113] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  267.626333] ata9.00: configured for UDMA/133
[  309.853171] ata6: hardreset failed
[  309.853175] ata6: reset failed, giving up
...
[ 1397.622315] ata6: link is slow to respond, please be patient (ready=0)
[ 1397.676349] ata9: link is slow to respond, please be patient (ready=0)
[ 1401.941222] ata9: found unknown device (class 0)
[ 1402.094254] ata9: found unknown device (class 0)
[ 1402.094287] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1407.582079] ata9.00: qc timeout after 5000 msecs (cmd 0xec)
[ 1407.582111] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1407.582117] ata9.00: revalidation failed (errno=-5)
[ 1407.656042] ata6: link is slow to respond, please be patient (ready=0)
[ 1409.453955] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1409.543077] ata9.00: configured for UDMA/133
[ 1446.972011] ata6: limiting SATA link speed to 1.5 Gbps
[ 1452.011882] ata6: hardreset failed
[ 1452.011895] ata6: reset failed, giving up


I would like to ask for guidance or ideas,
Thanks in advance!
Attachments
HM321HI-ROMs.zip
(1 MiB) Downloaded 135 times
fzabkar
  • fzabkar
  • Posts: 16960
  • Joined: September 8th, 2009, 18:21
  • Location: Australia
  • Website

Re: HM321HI PCB replaced - Not discovered

February 10th, 2025, 21:42

Show us a terminal log.

How to connect a terminal adaptor on a Samsung drive ?

https://www.hddoracle.com/viewtopic.php?f=116&t=189

I'm assuming that the patient ROM spins the drive.
lenisko
  • lenisko
  • Posts: 5
  • Joined: February 10th, 2025, 15:51
  • Location: Poland

Re: HM321HI PCB replaced - Not discovered

February 10th, 2025, 22:44

Thanks for instructions. I believe it spins and sound just fine, attached bootup recording just in case.

And here's output from term
Code:
ActiveFW : 00
                FWVer : 0001
                            SATA PLL cal done

                                             DDR size detected = 8MB
                                                                    *PA VID=0007 PN=0000 Rev=0004
                 *PA VID=0007 PN=0000 Rev=0004
                                              U
S_0SSC EN
SO_1
SSC EN
IS=4
CLA #36/59
Handoff RPM=763
SPOK
SR:53 SS:00000280
mS1 00000003
A1O=123 A1G=433
O=511 S=-1
SK C:  6042 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 0000
| 115 | MOVLY001 |  1 | 0 |   10 | 1140 |

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1008 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   814 H:1
X05:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   878 H:1
X07:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1014 H:1
X0E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   820 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1088 H:1
X13:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   812 H:1
SR:1
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   818 H:1
X15:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   818->   812 H:1->1 AP Cnt: 0
SK C:   948 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1088 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1042 H:1
X1D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1064 H:1
X20:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:  1009 H:1
X25:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   940 H:1
X30:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   974 H:1
X3A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   958 H:1
X3D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SK C:   808 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   979 H:1
X3F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   953 H:1
X42:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   953->   812 H:1->1 AP Cnt: 0
SK C:   815 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 0
SK C:   843 H:1
SR:1
AP:1 C:   843->   812 H:1->1 AP Cnt: 0
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   731 H:1
A1O=123 A1G=435
O=511 S=-4
SK C:  6147 H:0
SR:2
AP:2 C:  6147->   812 H:1->1 AP Cnt: 1
SK C:   857 H:1
X45:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1516 H:1
X4E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1230 H:1
X53:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1207 H:1
X58:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1086 H:1
X5A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1165 H:1
X5D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   932 H:1
X5F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1096 H:1
X64:00001.1.00C|0001 05E2 L000000003 r:0AFF p0000 s000C l0001 0000/0001

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   877 H:1
X66:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   979 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   864 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   818 H:1
X12:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1023 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1282 H:1
X1C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X1D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   851 H:1

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1107 H:1
X20:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   972 H:1
X22:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1030 H:1
X23:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   957 H:1
X25:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   957->   812 H:1->1 AP Cnt: 1
SK C:  1066 H:1
X26:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   992 H:1
X29:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1034 H:1
X2A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   995 H:1
SR:1
AP:1 C:   995->   812 H:1->1 AP Cnt: 1
SK C:   812 H:1
X2D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1008 H:1
X31:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1032 H:1
X33:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   819 H:1
X34:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   972 H:1
X36:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   814 H:1
X37:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   817 H:1
X39:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1012 H:1
X40:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1066 H:1
X42:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:  1027 H:1
X44:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 1
SK C:   940 H:1
SR:1
AP:1 C:   940->   812 H:1->1 AP Cnt: 1
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   731 H:1
A1O=123 A1G=435
O=511 S=-2
SK C:  5993 H:0
X46:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1699 H:1
X48:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1126 H:1
X4B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1355 H:1
X4E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1166 H:1
X50:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1156 H:1
X55:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   823 H:1
X56:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_2 00000FFF 00000098 00000000 00000000SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   823 H:1
SR:1
AP:1 C:   823->   812 H:1->1 AP Cnt: 2
SK C:   822 H:1
X57:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   991 H:1
X59:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   981 H:1
SR:1
AP:1 C:   981->   812 H:1->1 AP Cnt: 2
SK C:   808 H:1
X5C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1176 H:1
X5E:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   912 H:1
X60:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   811->   812 H:1->1 AP Cnt: 2
SK C:  1041 H:1
X63:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1006 H:1
X01:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   961 H:1
X03:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1104 H:1
X04:00001.1.00A|018C 05E0 L000000001 r:0AFF p0000 s000A l018C 0000/018C

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1099 H:1
X04:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X05:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
X06:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   982 H:1
X07:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   819 H:1
X0F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SK C:   812 H:1
SR:0
AP:2 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   816 H:1
X13:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   819 H:1
X15:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   948 H:1
X19:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1001 H:1
X1A:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1027 H:1
X1C:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1108 H:1
X1F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1052 H:1
X21:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   991 H:1
X23:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1001 H:1
X28:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1008 H:1
X2D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   960 H:1
SR:1
AP:2 C:   960->   812 H:1->1 AP Cnt: 2
SK C:   811 H:1
X2F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   962 H:1
SR:1
AP:1 C:   962->   812 H:1->1 AP Cnt: 2
SK C:   808 H:1
X31:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1044 H:1
X33:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   815 H:1
X34:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   976 H:1
X36:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1101 H:1
X39:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   883 H:1
SR:1
AP:1 C:   883->   812 H:1->1 AP Cnt: 2
SK C:   811 H:1
X3B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   985 H:1
X3D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   970 H:1
X3F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   976 H:1
SR:1
AP:2 C:   976->   812 H:1->1 AP Cnt: 2
SK C:   815 H:1
X41:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   998 H:1
X43:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:  1046 H:1
X48:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   814 H:1
X49:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 2
SK C:   984 H:1
SR:1
AP:2 C:   984->   812 H:1->1 AP Cnt: 2
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
UF6 GE
SoUL!
PK_3   C:   739 H:1
A1O=123 A1G=435
O=511 S=-1
SK C:  5990 H:0
X4F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1623 H:1
X52:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:2 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1007 H:1
X54:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   813 H:1
X57:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:  1076 H:1
X5B:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   882 H:1
SR:1
AP:1 C:   882->   812 H:1->1 AP Cnt: 3
SK C:   812 H:1
X5D:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   979 H:1
X5F:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A

S_0SR:0
AP:1 C:   812->   812 H:1->1 AP Cnt: 3
SK C:   868 H:1
X61:00001.1.00C|018A 05E2 L000000003 r:0AFF p0000 s000C l018A 0000/018A
| 115 | MOVLY001 |  1 | 1 |   10 | 0996 |
Overlay file read bad
E:00001
eng>
Attachments
HM321HI-boot-sound.zip
(522.03 KiB) Downloaded 147 times
fzabkar
  • fzabkar
  • Posts: 16960
  • Joined: September 8th, 2009, 18:21
  • Location: Australia
  • Website

Re: HM321HI PCB replaced - Not discovered

February 10th, 2025, 23:33

lenisko wrote:
Code:
| 115 | MOVLY001 |  1 | 0 |   10 | 1140 |
...
| 115 | MOVLY001 |  1 | 1 |   10 | 0996 |
Overlay file read bad
E:00001
eng>

This means that the drive can't load the main overlay code from the reserved firmware area on the platters.
lenisko
  • lenisko
  • Posts: 5
  • Joined: February 10th, 2025, 15:51
  • Location: Poland

Re: HM321HI PCB replaced - Not discovered

February 10th, 2025, 23:37

Is there anything I can do with that having somehow working donor? Or it's lost case?
lenisko
  • lenisko
  • Posts: 5
  • Joined: February 10th, 2025, 15:51
  • Location: Poland

Re: HM321HI PCB replaced - Not discovered

February 13th, 2025, 22:03

Would Hot-Swap method work in this case? Or there's a better alternative?
pepe
  • pepe
  • Posts: 4753
  • Joined: October 3rd, 2005, 0:40
  • Location: Hungary
  • Website

Re: HM321HI PCB replaced - Not discovered

February 14th, 2025, 2:43

H1 is also bad, possibly the surface too, so i would not torture it much if data is important.
job for a pro...
lenisko
  • lenisko
  • Posts: 5
  • Joined: February 10th, 2025, 15:51
  • Location: Poland

Re: HM321HI PCB replaced - Not discovered

May 30th, 2025, 13:50

Hey there!

Confirmed that most of the data was safe on other medium but would like to dig into remainings.

Can someone guide me briefly how could I process with hot-swap? I don't have professional equipment except a terminal adaptor and a screwdriver.
I would like to get a raw dump of anything that would be somehow readable in there, and process with PhotoRec afterward.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index