25X20CL dump from working Toshiba MQ04UBD200 G0090A PCB

[IT Services]

Hello HDDGuru community,
I need a big big favor please
Am in the process of recovering a USB Toshiba portable HDD - the 25Q80EWT ROM is valid but USB bridge FW is not.

Need 25X20CL dump from working Toshiba MQ04UBD200 G0090A PCB.
My chip is blank (all 0xFF). Marvell 88i1017-NDB2.
It would be awesome if anyone could please clip and dump their 25X20CL?

Thank you very much! cheers
-Kyle

[skinbob]

You could instead just convert it to SATA PCB G4311A. You only need to swap the ROM over.

[IT Services]

You could instead just convert it to SATA PCB G4311A. You only need to swap the ROM over.

Hello skinbob, thanks for the quick reply.

yeah, I know but I'll have to order the part from specific website and wait quite some time.. ideally we need to fix the drive by tomorrow evening. That's a challenge.

having that 25X20CL dump would be awesome.. at least to try..

Thx

[pepe]

Here you go...

Attachments

MQ04UBD200_25X20CL_ASM1153.rar

(21.98 KiB) Downloaded 16 times

[IT Services]

Thanks for the dump. I've tried to flash it back.. unfortunately chip is dead.. I'll have to order the donor PCB.
Pretty sure it will be ok with a PCB swap.
Finger crossed.

[pepe]

which chip is dead? the 25x20? or the bridge?