Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 5th, 2005, 16:36
i have the problem with wd1200jb-75cra0, the pcb is crach
i repair pcb, cold weld in pcb, i put the pcb in hdd, power on 1
the hdd is knocking, power on 2, power on 3, and the hdd now it both
i put on the machine, the bios recognizes the hdd, but the data nothing
i scan the data with soft and nothing, when i scan the hdd he is very slow
put the hdd in pc3000, and i send to cyl 9000 (Example) and everything 0000 and other, scan the module and all this good, that to have to review
Thank in advance