IBM Travelstar IC25N020ATCX04-0
August 15th, 2005, 20:06
Hey guys i have bizzaar issue with my IBM Travelstar IC25N020ATCX04-0 20GB (2.5")
When i connect it to the desktop windows see it like this "YY" or like this "YYYYYYYY" on the Computer Management->Disk Drives (also Win think it's 2 TB drive..i wish
)
I replaced the PCB with the same type and model of PCB and still thesame.
BIOS cannot see it and sometimes the drive have clicking noise.
I also replace the IDE cable and adapter but still Win show the drive name and info with YYYY there is to points above the Y
Any ideas?
When i connect it to the desktop windows see it like this "YY" or like this "YYYYYYYY" on the Computer Management->Disk Drives (also Win think it's 2 TB drive..i wish
)
I replaced the PCB with the same type and model of PCB and still thesame.
BIOS cannot see it and sometimes the drive have clicking noise.
I also replace the IDE cable and adapter but still Win show the drive name and info with YYYY there is to points above the Y
Any ideas?
August 18th, 2005, 20:19
Fix it...Thanks 
I just hotswap it (after 5 times it start working again)
I just hotswap it (after 5 times it start working again)
Powered by phpBB © phpBB Group.