Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Help needed to el. board firmware recognize!

August 26th, 2005, 16:01

Hello everybody! here is my problem: I have probably good eletrical board for HDD Barracuda 80GB. Disk is clicking click-click, I guess that board is OK. So, there is a problem: I don't know model of drive(sticker is removed). It's looks like :? Barracuda's 7200.7 3.04 fw, but I'm not sure. Maybe is the way to identify that thing??? :?: :?: :?:
Here is a link to picture of this el.
http://img153.imageshack.us/my.php?image=3047ja.jpg
The code in this little sticker and on other side is:100259208, manufactured maybe at 2002. Thanks for any support!

Re: Help needed to el. board firmware recognize!

August 27th, 2005, 14:39

qba wrote:Hello everybody! here is my problem: I have probably good eletrical board for HDD Barracuda 80GB. Disk is clicking click-click, I guess that board is OK. So, there is a problem: I don't know model of drive(sticker is removed). It's looks like :? Barracuda's 7200.7 3.04 fw, but I'm not sure. Maybe is the way to identify that thing??? :?: :?: :?:
Here is a link to picture of this el.
http://img153.imageshack.us/my.php?image=3047ja.jpg
The code in this little sticker and on other side is:100259208, manufactured maybe at 2002. Thanks for any support!


Just plug in the serial port :)

Re: Help needed to el. board firmware recognize!

August 28th, 2005, 5:48

guru wrote:
Just plug in the serial port :)


Sorry, I didn't understood. Maybe you can expand your answear, because I dont know WTHRU talking about. What :? "serial" port???

August 30th, 2005, 13:05

Hi,
You will see on this page...
http://www.hardw.net/forum/viewtopic.php?t=3683

Mikippp
Post a reply