terminal COM for disk 2.5' Hitachi

[bubu321]

hi,
who know commands to disk hitachy by terminal COM.
after connect Hyper Terminal ( 9600 Bd, 8N1) to pins DK23EB Hitachi, power Up, press ESC key.

Code:

Copyright(C) Hitachi,Ltd 2002
Code Ver: K0B42200
Checksum is
127FH

DK23EB>


any commands give only message

DK23EB>RT

MISSING PARAMETER

DK23EB>

[bubu321]

but after press ENTER, disk read sector by sector , sometimes saw master and user password.

Code:

DK23EB>RE

MISSING PARAMETER

DK23EB>


ADDRESS   00 01 02 03 04 05 06 07  08 09 0A 0B 0C 0D 0E 0F  0123456789ABCDEF
--------  ----------- -----------  ----------- -----------  ----------------
00000400  53 44 00 00 00 00 00 07  00 00 31 31 31 31 31 31  SD........111111
00000410  31 31 31 31 31 31 31 31  31 31 31 31 31 31 31 31  1111111111111111
00000420  31 31 31 31 31 31 31 31  31 31 74 6F 6D 65 6B 00  1111111111tomek.
00000430  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
00000440  00 00 00 00 00 00 00 00  00 00 34 12 00 00 00 00  ..........4.....
00000450  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
00000460  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
00000470  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
00000480  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
00000490  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004A0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004B0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004C0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004D0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004E0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
000004F0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................

DK23EB>


- but who know all commands ?

[Crudeoyl]

which laptop hdd pins did you use to connect to the serial port?
thanks

[bubu321]

hi,
- i'll use adapter 3.5" to 2.5" with hitachi, toshiba and Seagate terminal by switch.

Code:

____________________pin1_tx
...................... ..
...................... ..
_________________________rx


[khcon]

How do you actually connect to drive and PC?

[quasimodo]

Bubu,

any updates on this thread???

[bubu321]

hi,
- sorry but i have no time to translate terminal solution to command line.

[quasimodo]

That's ok Bubu,

maybee some other time.

Thanks