Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Samsung SP0802N problem

March 13th, 2006, 15:57

The drive is recognized by bios.
There are 3 NTFS particion, those are visible by Windows XP, but not browseable.

The Stellar Phoenix program can list the logical particion tree, but can not save data, because on the drive there are a lot of bad sectors.

March 14th, 2006, 2:33

Hello Kefe,

First try to make an image of the required partition's area and then try logical recovery.

regards,
pepe

March 14th, 2006, 3:57

Szia,

probaltam, de nem jutott eredményre 1 éjszaka alatt sem

Probaltam sector clonozást norton ghost-al, de folyamatosan bad sectort ír.

March 14th, 2006, 11:49

Hello,

This is an english speaking forum, hehe :)
Nem tudok jobbat javasolni, latnom kellene...

pepe

problem

March 14th, 2006, 14:20

this is a big problem in sp0802n it crashes instently i.e u power off the system and when u power up it has created bad sector and many reason genrelly happen after 1 to 1&1/2 year that what ihave noticed create image of partion u want to recoverd

DF

March 23rd, 2006, 16:22

agree with darkforce1, i have some sp0802n here with same problem, at some point of the SCAN (using remap or erase waits on mhdd) the process stops and no way to continue, the computer hangs

regards
Post a reply