Pcmx_pkr Assist needed !
January 11th, 2007, 4:14
Please someone help me i was do this job a week,
i have been load *.ldr and *.ram and the modules,
after i restart my cpu and try to maxblast the disk fail,
whats wrong with my procedure ?? please
(i have 2 hdd with poker and DSP, it have a same problem)
i have been load *.ldr and *.ram and the modules,
after i restart my cpu and try to maxblast the disk fail,
whats wrong with my procedure ?? please
(i have 2 hdd with poker and DSP, it have a same problem)
January 14th, 2007, 9:57
Which tools are u using for this purpose ?
January 17th, 2007, 6:13
i use pcmx_pkr and pcmx_dsp from PC3000 v.14 rusian version....
January 19th, 2007, 15:07
You must select the right LDR an RAM file for HDD
for example:identify by their checksum
for example:identify by their checksum
January 19th, 2007, 19:11
Isn't it WAREZ HERE ?
January 20th, 2007, 0:06
i try 5 firmware which different but this still happen, my hdd always have a lot of bad sector....??? 
January 21st, 2007, 5:26
Check the firmware structure first chek for damaged modules and rewrite them that would solve ur problem read the pc3k isa manual that would really help u .
Powered by phpBB © phpBB Group.