ERRORS SA WD

[sempre]

Hi all!
Help me recovery data hdd
MDL: WD200EB-00CSF0

LOG ERRORS (SA)

ID:18h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:18h-Head1 --> File Is Good
ShawKey.bin (Key File)

ID:21h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:21h-Head1 --> <---------------------[!!! Error Reading File !!!]
EventLog.bin (Event Log)

ID:23h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:23h-Head1 --> <---------------------[!!! Error Reading File !!!]
SectMap.bin (SectorMapTable)
-----------------------------
ID:25h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:25h-Head1 --> <---------------------[!!! Error Reading File !!!]
RBBList.bin (ReloBadBlckList)

ID:29h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:29h-Head1 --> <---------------------[!!! Error Reading File !!!]
DrmLog.bin (Smart Log)
-----------------------------

-----------------------------
ID:2Bh-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:2Bh-Head1 --> File Is Good
VndLog.bin (Vendor Log (DLG))

ID:2Dh-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:2Dh-Head1 --> <---------------------[!!! Error Reading File !!!]
DrmAlter.bin (SmartAlernativ)

ID:46h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:46h-Head1 --> File Is Good
RcFile46.bin (ReadChannelVal)

ID:4Ch-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:4Ch-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfRd.bin (SkewTableRead)
-----------------------------
ID:4Dh-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:4Dh-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfWr.bin (SkewTableWrite)

ID:70h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:70h-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfR1.bin (SkewTableRead1)
-----------------------------
ID:71h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:71h-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfW1.bin (SkewTbleWrite1)
-----------------------------
ID:72h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:72h-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfR2.bin (SkewTableRead2)
-----------------------------
ID:73h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:73h-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfW2.bin (SkewTbleWrite2)
-----------------------------
ID:74h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:74h-Head1 --> <---------------------[!!! Error Reading File !!!]
SkProfR3.bin (SkewTableRead3)
-----------------------------
ID:75h-Head0 --> <---------------------[!!! Error Reading File !!!]
ID:75h-Head1 --> File Is Good
SkProfW3.bin (SkewTbleWrite3)

Help

thanks!

[lbpcwd]

1.check the PCB
2.maybe head bad
3.some trouble in 0 head -20 track

[Doomer]

This guy just put this Stellar commercial everywhere :)

[lbpcwd]

try hot swap
then make a img file by pc3000-de

[pepe]

Hi,

Hotswap will not work with WD.

pepe

[Deave]

Hi,

Hotswap will not work with WD.

pepe

I thought hot swap WORKS with WD but not with Maxtor

[Dmitry Postrigan]

driveRecovery
moderator note:
Please stop spamming the forum with your software.