Calipso YAR41BW0, KMCD, 6Y160P0042211 Firmware Needed

[quasimodo]

Hello,
I am looking for the following firmware for Salvation Maxtor Firmware Recovery. If anyone has this Firmware and could share this functioning for Maxtor Firmware repair pro, this would be great. Or if you can perform a Firmware backup from functioning drive. If not, then I can also work with Regular Firmware for Pc3000, etc...
I will try to return the favor, if at all possible.
Thank you for your help.


Series: Diamond Max Plus 9
Capacity: 160GB
Code:YAR41BW0
K,M,C,D
6Y160P0042211

Salvation identifier: 1BW0KMCD

[pcimage]

Yes, I have one of those.

You have PM.

Or msn me at sean@pcimage.co.uk

Sean

[franckrules]

Guys,

I would be nice if instead of PM you upload file directly on the file section:

http://files.hddguru.com/

So everybody could share.

Regards

[pcimage]

franckrules....

Good idea! I shall do that too.

Any other fw required?

Sean

[abroz476]

Hi!

My MAXTOR DiamondMax Plus 9 (80Gb) has well - you know FW problem.
Here is what I have on this disk
Main Label:
Code: YAR41BW0
N,M,B,D
SN: Y3KDNEEE
6Y080P0132213

Label on IDE connectors reads:
F8FYA
Procesor is Ardent.

Any help? Does anybody have FW for this one?

Thanks!!!!

[pcimage]

Gor YAR41BWO for a 6Y080L0 if that's any help?

[abroz476]

Hi!

I really don't know - there is no difference EXCEPT in cache (2Mb vs 8Mb), but what I have read in past 5 days - you never know with Maxtor.