Selfscan problem

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
rameez
  • rameez
  • Posts: 2288
  • Joined: June 27th, 2006, 11:33
  • Location: In ur HDD !

Selfscan problem

February 11th, 2007, 7:12

I did a selfscan on Maxtor 2b020h1 dsp drive it took about 8 hours i connected it to a external power supply with LED connected for monitoring after 8 hours the led switched off then i connected the drive to victoria for scanning its model changed to 2b010h1 and capacity changed from 20gb to 10gb and the surface was full of bad sectors what should i do .

Thanks in advance .
Samo
  • Samo
  • Posts: 505
  • Joined: September 27th, 2005, 4:26
  • Location: Bulgaria, Sofia
  • Website

Re: Selfscan problem

February 11th, 2007, 17:06

rameez wrote:I did a selfscan on Maxtor 2b020h1 dsp drive it took about 8 hours i connected it to a external power supply with LED connected for monitoring after 8 hours the led switched off then i connected the drive to victoria for scanning its model changed to 2b010h1 and capacity changed from 20gb to 10gb and the surface was full of bad sectors what should i do .

Thanks in advance .

Clear defect tables, and start again.
rameez
  • rameez
  • Posts: 2288
  • Joined: June 27th, 2006, 11:33
  • Location: In ur HDD !

February 16th, 2007, 3:28

Thanks i will do that .

Can selfscan fix damaged overlays ?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index