Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 26th, 2007, 16:05
Hi to all!!
hdd toshiba MK6021GAS
THE MOTOR SPINS VERY SLOWLY (30 RPM) AS I DO IN ORDER THAT IT WORKS TO (REVOLVE)
Thanks
March 27th, 2007, 3:31
Suggestions:
1. Apply hot air to underneath of spindle.
2. Loosen silver disk underneath and re-apply lubricant to spindle
3. Swap platter to good shell.
March 27th, 2007, 8:00
pcimage wrote:Suggestions:
1. Apply hot air to underneath of spindle.
2. Loosen silver disk underneath and re-apply lubricant to spindle
3. Swap platter to good shell.
March 29th, 2007, 17:05
What is a technique to remove that spindle bearing cap on the bottom of drives anyways? Do they usually spin out? I've seen people cut a groove into the cap with a dremel which I assume is to use a screwdriver to spin the cap out.
Powered by phpBB © phpBB Group.